After my cockpit drain fix, I'm still getting a little water in the bilge from the cockpit deck when it's being washed. Looks like the only way to fix is removing the screws and lifting the deck. The game plan is for 2 of us to be underneath the deck. One lifting a section with our shoulder and the other placing a 2x4 between the deck and the cap until the hole deck is fully raised. Will get to inspect the gasket and hopefully a good clean and some good silicone sealer(don't want to use anything to make it a pain if I have to lift it again. Only 4 small areas but I don't like any water in the bilge and won't rest till it's done. Will try and post some pic's as it should be interesting.....