My kitchen sink, bathroom sink, and shower would not turn on. I found my fresh water pump, which is a Jabsco 31620-0092, was about a quarter the way under water down in my hull. The red wire from the back of the motor runs to the front of the pump (which google told me is a pressure switch). That motor red wire is connected to the pressure switch, but the other red cable coming off of it, which should go to the power supply hot wire, was disconnected. Where those connections are on the pressure switch are under water. Before hooking it back up I wanted to ask if that is ok?? It does not seem to be sealed and protected from water at those connections on the pressure switch. I’ve been having issues with the water pressure breaker cutting out and I’d have to flip it back on over the last several weeks. Thanks!