We had a Sealand 8600 with Bidet toilet in our aft cabin head. While tightening the connections we snapped the plastic check valves. This head is a discontinued model! We looked into getting replacement parts and decided to purchase a new head. Yesterday, we were at the boat and taking measurements, adding some shut off valves and other things. We have always known that this part was in the boat and thought it was a part of the head. Taking a closer look at it, we have no idea what it is o ...

Pair of 28xR29 2 1/4 off 2001 Carver 466 Volvo's. Both are great condition. Also a brand new shaft for same.
Call 989-239-2089 Dennis

Hello All,

Had a loose fitting on my bridge hydraulic steering system of my 2001 3565 which caused fluid to leak down onto the vinyl interior salon headliner. Bummer! Does anyone know what manufacturer/color the vinyl is in this photo to save me lots of time trying to find something that might be a match? Any help pointing me in the right direction would be greatly appreciated!

Does anyone know where I can find a copy of 1992 Carver 33 owners manual?

New owner and can't figure out the two dimmer switches for the salon lights. Previous owner told me push once and release then hold the up side until light come on and adjust to the desired brightness. Tried both and can't get either to come on at all. What am I missing?? Thanks

Hi Guys , I bought last December a 2006 Carver mariner 36 .

The boat has the 5.7 volvo penta engines .

The survey found no issues with the boat .

The engines both have 300 hours on them .

As it was stored in a heated place 2 hours away from location , I brought over the water to my home .

My problem is that both engines only make 3200 rpm and then stull out .

When I reading correctly the engines should make 5500 rpm .

As I ask a mechanic ,he said it could be the wrong probs .

But it still shut off on ...

In the cabin of my 3607, I had several of the lights below. They worked great, especially after I changed out the light bulbs from incandescent to LED, but the plastic shade had yellowed quite a bit (as in pic).

I bought a couple sections of white plastic tubing and made new shades for all the lights on my boat. I sold that boat, but still have some pieces of that plastic tubing. It's thicker than the original, but like-new white color and the old shades can be changed out to these pieces, a ...

A boating friend has an issue with his fridge working only on 110. The 12 volt side is not working. Any ideas where to start checking and chance of finding parts?

Recently purchased a 2000 450 and looking for suns shade options for the aft area. Anyone find a retailer that makes a good option? Prefer to have it attach at the rails behind the fly bridge and extend to the back connecting to the rod holders. Thx!

I have a 2004 Carver Mariner.



Yesterday when I went to my slip I noticed everything was off (connected to shore power)



Did the usual:

Checked breakers (nothing was tripped)

Checked plug (no black marks- looked fine)

Reset everything

Plug into a different shore power unit (still no power)



Generator runs everything fine- but when I switch to shore power it has 0 amps and the shore power green light doesn’t illuminate.



Any suggestions would be appreciated.