I am looking for the rear escape hatch for a 1997 4100 sca . someone made one out of plexiglass and want to put it back to factory. I also would like to find the side doors for the rear deck. that was also hand made by someone. Thanks for all of your help.

Ok, New to us 2004 466. Anybody else seen these issues?



Pre-purch Survey said -- "wet" around (1) anchor locker drains; (2) stbd side aft thru hull and (3) all over the port & stbd 'wings' of the swim platform.



So we took the boat to Zimmermans in Deltaville VA to investigate and repair.



On (1) - - I pulled the exterior clam covers off the drain holes myself. Stbd side -- NO SEALANT INSTALLED AT THE FACTORY OVER THE BALSA CORE BETWEEN THE FIBERGLASS OUTER & INNER LAYERS!!! Wh ...

Hello All! Just purchased a 1994 350 Aft Cabin. The boat is in very good condition w/only 252 original hrs. and 30 on genset. Will have to drive the boat back in the spring as I live in central IL and the boat is in Cincinnati. Looking for some info about the run down the Ohio River to the Mississippi to the IL river. If anyone has done this trip and has some advise, please let me know. Will be leaving bout mid may? Thanks Dennis

Hello All! Just returned from a trip to Charleston SC, and Oceanside Isle NC. The Admiral and I were looking for prospects for winter season rentals to deal with our "love" for 6 month winters in Green Bay. Stayed at a hotel next to a marina in Charleston. Needless to say, went for marina stroll each day there. Did not see a single Carver in this >200 slip marina. Most were Bertrams, Hatteras, OA's, and the like. Lowest quality rated brand was Viking. There was also dry rack storage of numero ...

Hello, first time on the Carver site. I’m asking for advice on replacing the forward head shower sump drain hose. I don’t see any access to the hose at the starboard thru hull drain on my 3607. Any help would be greatly appreciated.

Hello! Let me start by saying I am not a sailor and am here because I very desperately need advice...if you're reading this and can't help but know someone who might be able to, it'd be greatly appreciated if you could pass this on.

The story is this: recently the subject boat came (more or less) into my possession--at least I have taken basic responsibility for it--and I'm trying to find out if it's even salvageable and if I can find it a home. I don't have the money or even the interest in re ...

Would anyone know where I can purchase parts for a windshield on my 2001 350 Mariner?
Looking for a missing joining piece at the very centre of the windshield.
Any suggestions you may have will be greatly appreciated.

Mike.

Has anyone had to replace or repair one of the long side windows in the main Solon of a 396? I'm wondering what type of sealant would be best to use to re-install the window?



IF your curious...



This is what I ran into:



Port side aft window of the main salon tinting began to flake off and look unsightly

I removed the window only to find that the glue that held in the window was adhered to the black tinting and because the tinting had failed, the sealant in many places was no longer holding the win ...

Hi everyone, just bought this boat a few months ago. Can anyone give me advise on what oil and filters to use on my 1997 Carver 455 with Crusader 502XL series engines. They have approx 750 hours on them. Also, oil recommendations to use on the Koehler 10KW generator? Appreciate any help! Thanks.

Good morning all. I am desperate to find information on how to repair my 2001 570 Voyager. First let me say this a beautiful well maintained, updated boat with around 900 fresh water hours. The specifications are as follows;



Engines-Cummins QSM11 535s Serial # Port 35016246, Starboard 35015841

Transmissions- Twin Disk



My issues are:

1) Port transmission seems to have a vibration that throws the engine into limp mode and will not allow speed of more then 1400 rpm. Throttles are slow to respond on bot ...