Hello Everyone,



I'm beginning my diesel heater installation. I'm installing the heater in the hatch under the salon table. First step was removing the Red Dot which went relatively well. After some leakage, I managed to trim back the coolant hoses and get the space ready for install. I decided not to interrupt the coolant flow circuit for now. It remains a loop.



One of my concerns is where I'm going to draw fuel from. I'm leaning toward installing a bronze "T" in the fuel line after the prim ...

Hi - I'm new to the Carver Forum.
I have a 2002 410 Sport Sedan. The props were changed out at some point by the original owner. It has twin Cummins diesels (370 hp). It struggles to get on plane unless I turn the steering wheel and then it seems break free and come onto plane. Current props are 24x29. I am trying to find out what the original props were on this boat. I think the replacement prop pitch may be too much.

During survey the surveyor found that the steering pressure was at 10 lbs. I understand that it's supposed to be 20-25 lbs. I didn't get to see what he was looking at, but pretty sure he saw a gauge. Question is how do you increase the pressure in the system?

Hello!



Looking for input. Couple of years ago I set up solar on my boat, works like a charm. I can last on the the hook up to 5 days without worrying about charging.



My Kholer generator has broken down, and am thinking of ripping it out of the boat.



I would replace it with a high output alternator on 1 of my engines. I am using the Integral epower alternator as an example.



Running the 1 engine for appox 1 hour at min 1800rpm would generate 8-9kw (according to their literature).



Why would I not j ...

I have this vent? On the side of my bot. Any idea what it migh be?

Good morning
On the bottom of my boat I have this sensor? Anyone know what it might be? The wire coming off of it looks like a radio antenna wire or RCA cable.

Thank you

Wondering I can get some help on this. In my parts catalogue it list opt 946/949/960,966. My question is how do I find out what opt pertains to my boat

Hi guys. Needing some help please. We had a mishap with our vessel, resulting in the lower helm gear shifter snapping (cable got caught underneath and pulled through) we have the replacement cable but I can't find a replacement shifter. We brought one here in New Zealand but it's nothing like the Carver ones and won't work. I can't seem to find anything online. Is there anywhere I can buy parts like this please? It's a 1988 carver convertible 3227

I have a 1987 Mariner moored at a marina that is going through extensive renovations. They have been moving boats around to different slips during their ongoing work and upgrades. They will be shifting me to a final slip in a few weeks and is a newly constructed slip. I have now just heard that boats made before 2012 will have problems hooking up to power. They will trip the GFI breakers on the shore power connections. Probably due to the Neutral and Ground bonded together in the older boats. An ...

Just finished shovelling another foot and a half of snow out of the driveway, trying to trick my brain into thinking spring is close…lol. Bottom needs doing on my voyager 28. Question for the group. I believe it’s a copper based Antifouling on there currently, at least that was what the surveyor put in his report when I purchased the boat. It does not rub off easily like an ablative so I believe his assessment to be correct. Overall the bottom is in decent shape. Was planning on a light sanding ...