I own a slip in the Saint Joseph Island Yacht Club. 45ft x 25ft. My renter bought a smaller slip upriver, so this one is for rent. Slip number is 26.
$1,700 for the 2020 season. Would prefer a long term renter.

The slip is "inside" meaning it is off river and protected from any current. And it's 25 feet wide! Shared services with Anchors Way Marina, which includes use of the pool.

Well I just received from my insurance broker yesterday, the company that has held my policy for the past 5 yrs won’t renew us. We have no claims, boat is in very good condition with every required update that insurance companies require.
We are a 1984 Carver3227, they gave us no reason other than we are not insuring boats over 30 yrs.
Has anyone else came across this? If so who did you use? We are BC, Canada mind you.

Thank you
Troy

Proud to say Marquis/Carver was chosen to build this exclusive yacht. a little out of my price range but you must have dreams.

https://www.lexus.com/LY-650/

Ok. The project for this spring was to replace all the hoses, and replace the heat exchanger on the starboard 2006 Crusader 6.0 engine. I was able to use my oil change pump to pull the antifreeze out as I took the hoses off and kept most of the antifreeze off the bilge.



When I took the old heat exchanger off, though, I noticed that one of the rubber gaskets that seal the sides up had a hole torn in it. I didn’t have a leak prior to pulling. It made me a little curious. As long as the ...

Does anyone have access to wiring diagrams that are more in depth than the owners manuals.Looking for main fuse panel and anchor schematics. Thks guys and gals.---Todd

Vessel- This is on a 2006 41 CMY with twin gas engines. It has four blowers, four breakers on helm breaker panel, one blower switch on instrument panel (main on and off for all four), and one switch on the dc panel in the salon you can use to turn on blower prior to starting genset.



Problem - tried to turn fans on. All four breaker switch’s on, main power for dc panel on, instrument panel switch turned on. Fire extinguisher light comes on, light in instrument switch on- nothing from blowers.
...

Needed to get out on the water with my good buddy, he's going through a divorce and could not be quarantined at home. Bitter sweet.

I am looking for a replacement hatch cover for my forward cabin hatch. It is a BOMAR with a sticker on it that says :BOMAR 94071225. My Carver Line Sheet says "Hatch, 22 x22 part 733800. Neither come up when googling. Would this cross to a low profile series? Any input would be super.

Hi all,

1990 Santego 3467:
One of the bilge pump lights is not working. The pump and the float switch are fine. How do I remove and replace the light? What brand replacement should I look for?

Thanks,
Barry

Hello everyone. I am wrapping up my electronics and dash update project. I didn't want my new screens above my head so I redesigned the dash to house them. Did away with the analog gauges and brought the engine information into the N2K network, so that I can monitor the mains on any of the mfd's. Wanted to share with you all. Dave.