Looking for a Bimini top boot cover. Preferably in Cobalt or Marine blue color. I have a 1994 Carver Voyager 320. It has a 4 bow rod assembly. Live in a small community in South Dakota. Only a couple of canvas folks here and this is not a priority project for either. Any suggestions on where I might find one? Thanks in advance!!!!

Bought my Carver motor cockpit last season but am newer to the forum. Appreciate all insight and advice so far.
Be Safe!!

Tom here from Boulder City NV. Just bought a 1988 Carver Voyager. Tough during this virus thing. Lake Mead is closed but we can shelter in place on the boat in the Lake Mead Boat Harbor. Lot's of questions to ask or search for.

My Carver 1988 3807 interior woodwork needs a refreshing. Does anyone have recommendations on the proper finish to use and process/procedures?

Thanks!
-Dale

I saw a discussion on the Trent Severn Waterway Forum, here in Ontario, where someone stated that you must be sure to install your impeller properly. They went on to say that impellers do NOT self correct if they are put into the housing with the blades in the wrong direction. The author advised that if your marine tech tells you they do self correct, it's time to find a new tech.



I have always been told that impellers do self correct and I have been advised this by marine tech's over the year ...

Hello. I need some advise from someone that is familiar with the 2004 360 (8.1L Crusaders) sedan with access to the top of the port engine. I need to pull the fuel rail and am wondering if/how to pull the floor up to gain access. The refrigerator and wall cabinet are there as well as the galley floor. How/can they be pulled up and removed?

Thanks in advance if anyone has tackled access on the top of this engine on this model.

Scott in York PA.

In the summer of 2020, while still on the dry, we had a full custom canvas and Isenglass enclosure made and installed by Yuriy of Cover-All Marine, Mullica HIll, NJ (http://www.coverallmarine.com/) . Yuriy's work is top notch. We launched very late in the season and enjoyed three days travelling before tying up at our home port at Schooner Island Marina in Wildwood, NJ. A few weeks later our beloved CPMY went down in a "Bomb Squall" while docked at our marina. The sinking was partial; salt w ...

I need to replace the folding side window latches on my 2003 366. Mine have just rusted & seized up & trying to clear them the soft metal just broke off. Any idea who the original manufactuere was, or where to buy replacements?

Hello all, I am currently searching for a gremlin in my port engine. I have Diacom and can pull all the info the ECM receives however I don't really know what to compare the info to. Is there a chart that is available that displays the RPM-MAP-IAC-IPW-Spark Advance etc. to know what the target parameter is for each at a specified RPM? I understand a chart with this info could be extremely complicated and large however there has to be some sort of table because that's what the ECM uses. Any thoug ...

Does anyone have a recommendation for a Random Orbital Polishing Machine? There are a plethora for sale.
Shurehold features a unit ( mfg#3500) that seems pretty interesting, however I would appreciate your first hand experience and feedback.
Thanks.