Our boat has the floscan fuel measurement system. Since floscan no longer exists, I wonder if it's time to look at alternatives. The gph and consumption are nice but I feel like I'm tracking fuel amounts in reverse. Call me old fashioned but I'm fine with fuel gauges.



That being said, is it feasible to replace the floscan with gauges? Is it a huge PITA or just the usual boat level PITA?



I'm guessing the technology of gauges has improved.



Comments welcome.

Need to replace one window and screen in lower deck but I have no idea where to order from. Can anyone help here?

Hello!
We need to replace the screen in our aft sliding screen door, but can't figure out how to remove the door. It's not spring loaded. There are no visible screws holding it in place.
Any other 530 owners out there removed their screen door?
Many thanks,
Julie

Why do boat ignitions have loud buzzers? If it's to warn me I'm about to start the engines, I know that. Can the buzzer be disconnected? If yes is it a PITA or relatively straightforward?

I have a generator issue as well. Fired up the genny and went to the control panel. Flipped the ship breaker on the house side (appliances, receptacles, etc.) and no power on the meter. Flipped the breaker on the air conditioning side and full power on the meter.

Comments welcome.

Looking for anything from factory templates to actual panels that are in good condition for our 1995 370 Aft Cabin.

Thank you in advance.

I am trying to register for a MMSI# for my VHF radio.
The form is asking what "Gross tonnage (vessel's internal capacity in tons)"

Any ideas?

Oh and how about this one, "Capacity for person on board (maximum number of persons on board"

Thanks

Good day to everyone, we have a new to us of 6 months 1996 320 voyager with twin 350 crusaders that I am replacing the impellers on and there are no numbers of any kind on the pump housing what so ever, the only markings on the pump housing is the manufacture, "Sherwood", I found a supplier for the impellers but I when I ask for the cams they want to know which Sherwood pump I have, there are 3 pumps in that configuration that look alike but the cams are different according to the supplier. wou ...

And do you ever wish it was larger, or would you still pump it out frequently anyways, even if it was larger??

I currently have two 40 gallon waste tanks. They both need to be replaced, along with all the hoses (ching ching $$). I had a brainstorm today and was thinking about just using one tank and plumbing both heads into the same tank. If I do this I only have to buy one tank and I could even buy it a bit larger than the original, so I could go up to 50 or 55 if necessary. It would al ...

My wife and I are considering downsizing our "dream boat", our 2000 506.



She is powered by Volvo Tamd74EDC mains that just broke 700hrs, I have owned her since 170 hrs. She was commissioned in 2001 and her home port was Toronto, and her original owner took her down to Florida to live and then back to Toronto in 2004 due to health reasons. She sat dormant from 2008 to 2014 as her owner died of a brain tumor and the estate used her as a floating cottage.



The genset currently has 1600hrs. Oil changed ...

Hi,
I have recently noticed water coming out of the port corner of my swim platform. The water seems to be pushed out periodically almost like from a bilge pump. The caulking is mildewed and is going to be replaced (boat hauled out at the moment), but I am concerned if the problem may return. Has anyone ever seen this issue?
Thanks,