• Global announcements
No global announcements

  • Latest Posts

Post Carver Placard


Afternoon! We recently bought a 1989 3207 Aft Cabin. One of the "Carver" placards was off and I am wondering what I can use to clean the "foam" off the back of the placard and the residue off the hull and what I should use to adhere it back to the hull? I've tried Goof Off to remove the residue from the back of the placard but it isn't taking it off well.

Thanks in advance!

1989 3207 Aft Cabin
350 Crusaders
Spring Lake MI

Views: 1888  •  Comments: 4  •  Write comments

Post Placement of Air Conditioning unit 32' Aft Cabin 3207


Can anyone help with information on the location of factory AC unit on a 1984 3207 Aft Cabin Cruiser? I have owned the vessel for 31 years and would like to consider installing an AC unit. Nort sure of what space to sacrifice for the AC.

Views: 1991  •  Comments: 2  •  Write comments

Post swinging at anchor


28 ft voyager- While at anchor with a 7 knot or so wind and no current, the boat swings 50 degrees left and right. I tried turning the rudders hard over with no effect. I'm thinking about deploying a small sea anchor off the stern. I'm getting dizzy. Any ideas?

Views: 5628  •  Comments: 11  •  Write comments

Post Carver 444 cabin lighting to LED


Just completed replacing all my cabin lighting to LED. Bought them on Amazon for 160$ for 30 lights. Came out excellent. Pretty easy job. I have about a dozen gold trim rings that arent cracked if anyone would like them. The

Views: 2752  •  Comments: 6  •  Write comments

Post 41 CMY Windshield Gasket


I need some help identifying the gasket used to seal the bottom of the plexi windscreen and hopefully where to purchase some new material. (pictures attached)

Views: 1953  •  Comments: 4  •  Write comments

Post Electric head questions


I am days from owning a 95 355 aft cabin and have a couple questions about the electric heads.



Just playing around I noticed that the aft head pumps way more water than the front head. I also noticed that neither head had any water sitting in the bowl. The flush button on the wall did just that, flushed. Is there a way to add water to the bowl? It all just flushed away.



I'm thinking that I might need to rebuild the impeller on the front head since I could barely get any water for flushing. I d ...

Views: 2997  •  Comments: 9  •  Write comments [ Read all ]

Post Just bought a 356 diesel


Hi, we just became the owners of a 2001 356 with Cummins. Only had it out once. Plan on getting familiar with it this fall and next summer, then head down to the gulf from MN next year.

I’ll have lots of questions. My first one is, where can I find an Owners Manual for this boat? The Carver website has a complete parts manual for it but when I search for an owners manual the closest thing I find is for a 350 Mariner.

Thanks

Views: 1953  •  Comments: 4  •  Write comments

Post Black Streaks


Well its that time of year where the boats in my neck of the woods develop those pesky streaks on different areas of the yacht.

Perhaps they appear because there is more rain now, but in any event they are a pain for those of us who pride ourselves on a clean boat.

I would be interested in knowing how you folks attack this problem. I know that a product like 'Simple Green' eliminates them quickly, but I believe it also takes away a coat of wax. I find myself cleaning them with 'Mcguires Cleaner/ ...

Views: 3329  •  Comments: 6  •  Write comments [ Read all ]

Post Access to seacock


Hello, in the 1990 3608 Aft Cabin model, how do you access the seacock for the aft cabin head. When I removed the bottom drawer of the bank of drawers to the left of the bed, I can see part of the valve but cannot access it.

Views: 1689  •  Comments: 2  •  Write comments

Post Best cleaner to get oil off of gel coat


Tried dishsoap, followed it up with vinegar dishsoap mix, followed that up with comet/softscrub, but I can still see fingerprints, etc. that were slightly oily from when I was doing my last oil change. What has anyone used to get this little bit of residue off of or out of the gel? I'll try mineral spirits next, but has anyone had any luck with anything else?



I think I'm having more of an issue than I'm used to, because the boat sat outside for 2 years and has virtually no wax or sealant on ...

Views: 2116  •  Comments: 5  •  Write comments [ Read all ]




  • Who is online?
  • In total there are 1389 users online :: 4 registered, 0 hidden and 1385 guests


  • Newest members


  • Statistics
  • Totals
    Total posts 68214
    Total topics 8204
    Total Announcements: 0
    Total Stickies: 4
    Total Attachments: 6675

    Topics per day: 2
    Posts per day: 14
    Users per day: 2
    Topics per user: 1
    Posts per user: 6
    Posts per topic: 8

    Total members 11576
    Our newest member Cyborg73

  •  Birthdays
  • No birthdays today
    In the next 30 days
    No members have a birthday within this period of time.

  • Sponsors