I have a LOT of miscellaneous parts that I picked up from a guy who was going out of business. They did marine HVAC systems all over the midwest. I have several boxes of ducting, grills, vents, splitters, hoses, etc. If you ever thought "I'd like to add another vent here", then now is the time to put that plan in place!!



If you're working on a project and need something like this, let me know, as I can give you a very good price. I have a ton of different colored 4" vents, hundreds of ...

I've been reworking some of the stock power on my 3607. There is a main "salon" breaker and lead going to a strip of push-on connectors under the lower station. You have to remove 8 screws to get the panel off. All the lower station electronics tie into this panel, some with their own in-line fusing. There is also a parallel negative buss for grounds.

So I'm installing a fuse panel to split up the loads and also get rid of the push-on connectors, as they get unreliable with even slight cor ...

I am trying to fine the part number to replace the helm wiper. I need to replace the whole assembly, the wiper blade broke in half at the mount. The motor does not turn the camshaft. It's on a 32' 1989 Carver Aft Cabin, 3207.
Thank you

On my 3607, the bottom step is hinged so you have access to the battery and fuel switches mounted inside.

I noticed that there seemed to be a gap under the second step, so when I was re-doing the carpet on the steps I decided to unscrew that step and check it out. Sure enough, there is a compartment there that's two steps high and one step deep. So I bought a piano hinge and now both steps open up for access.

I'm thinking of moving my battery and fuel switched up to that second step. I've been ...

My best friend and I just purchased an '86 3607 Aft Cabin. This forum was already a great source of information as we were doing our shopping - first for a '32 and then things got a bit out of hand.

Looking forward to being part of the great community that you have here!

P.S. Did I mention our maiden voyage will be to cruise from Muskegon, MI to Huron OH? And that this is our first boat? I expect that you'll be hearing a lot from us.

We want to replace faucets with single wand/handle. Has anyone tried this?

Has anyone tried Noflex Digestor? I have ordered some - should arrive tomorrow.

Hi. New schurflo aqua king II 4 gal per min fresh water pump. Does not provide steady flow; cycles continually (no accumulator tank). Better as more faucets opened. Why am I not getting steady flow? Pump too big?



Other than galley, hot water flow very weak; even on shore water (galley not great). Almost no flow. Faucets have been replaced with home type spout faucets with no aerators. Best flow overall is cold water wet bar faucet (stock) on bridge.



Any thoughts? Appreciate any insights.

Hey all, I have a 1995 355 Aft Cabin. Looking for option to put a gate to block the stairs from the cockpit to the swim platform.

I have seen newer or 40ft versions of my boat with what appears to be a white gate for that area. Anyone have an idea where I might be able to find one? Or has anyone come up with an alternative solution that worked well.

Thank you in advance for any ideas, suggestions or feedback.

This is kind of what I am looking for:

So I am totally confused while working through an issue on my generator. I have a 1995 Carver 355 Aft Cabin. It has a Kohler 6.5kw s/n 347222 if that helps.

The boat is fairly new to me, lost an engine last year on my maiden voyage so it never left the dock. This year started using it and working through this generator problem. What is interesting is I don't have a transfer switch on the panel. This has me super perplexed. I thought maybe there is an automatic transfer somewhere I cant see?
...