• Global announcements
No global announcements

  • Latest Posts

Post rinda techmate pro scan tool


Heh there....do any of the Canadian guys out there have a current tech mate pro that they might consider selling???...Thanks .. :beergood:

Views: 6192  •  Comments: 13  •  Write comments

Post Well that escalated quickly!


Hey everyone, pretty new to the forum but have really valued the discussion as I found my new to me boat. Late last year I purchased a 1995 355 Aft. Survey went extremely well including seatrial. The boat was located in Scituate MA and we decided to move it Westbrook CT. It is approximately a 135nm trip. Anyways after months of working on her updating etc yesterday was the day. The tanks were about half full so before leaving Scituate Harbor filled up with fresh fuel. Got underway about 7;30 am. ...

Views: 10705  •  Comments: 35  •  Write comments [ Read all ]

Post fuel tank in a 45' Voyager


Is there anyone out there who knows how the baffles are constructed in the 227 gal. tank? We are having an issue with the starboard tank, and the fuel polisher (as well as the other 2 a year ago) say they can only reach one area - this side of the baffles. My captain tried to keep things stirred up by using an air compressor, to no avail. We went 4.5 miles and then the starboard engine stopped. Mind you the port tank is fine - and we always add diesel fuel to both tanks when we fuel up. The st ...

Views: 4969  •  Comments: 7  •  Write comments [ Read all ]

Post Prospectiveverything owner


I'm looking at a 1988 3607 with twin crusader engines. Strictly coastal cruising. Anything problems in particular I need to look for with this model? I am getting a survey as well.
Thanks

Views: 1275  •  Comments: 1  •  Write comments

Post Capacity of my boat


The family is coming up for a boat ride this weekend and I was wondering what the capacity of persons of my boat is. It's a 27' Carver Montego. I haven't been up to the boat the last two weekends to check, but shouldn't there be a plate on the boat telling me this information? I couldn't find anything in the printed out owners manual I got off Carver's website.
Thanks,
Jack

Views: 1626  •  Comments: 3  •  Write comments

Post 3807 Aft Deck Refrigerator and ice make replacement


Good day all.
We need to replace both the refrigerator and icemaker on our Aft deck of our 3807.
Does anyone have dimensions and model replacements for both? Also need to know if I could find these items at an RV supply store.

Views: 2567  •  Comments: 7  •  Write comments

Post 310 Santego 5.0 liter twins


Hi there and so I'm new and still investigating this boat, and may have a really STUPID question...I've just discovered that port is replaced and approx. 7 years newer than starboard. Starboard appears original and has a Rochester quadra-jet setup with spark arrestor. Port has a LARGE Holley double pumper and just a cleaner. The stupid question...this is not normal is it? I'm under the assumption that the setups should be identical. That stated, the engines perform differently and planing i ...

Views: 2448  •  Comments: 5  •  Write comments [ Read all ]

Post New Owner 94 Santego 31


Hi folks! I'm jumping back into the water after a 15 year hiatus....still going over the new-to-me Santego and heading to the repair forum but just wanted to say Cheers...we boat from Erie, PA and will be enjoying it as much as we can! New to forums and considering myself new-to-the-water so am being quite diligent and careful. Hoping to be moving up within a few years but already know we'll be Carver faithful!

Views: 2030  •  Comments: 6  •  Write comments

Post NEXUS Card


I applied for a NEXUS card on May 23rd. Does anyone here know how long the process usually takes? Just curious as my passport expires on August 16th and I am not planning to renew it.

Views: 5154  •  Comments: 16  •  Write comments

Post Almost a Carver owner


Hello new guy here. Working a deal on what I believe is a 1979 Carver 3326 with twin 270 Crusaders. Hour meter shows 475 hours. She is currently on a trailer and has been there for at least 8 years. It is actually in pretty good shape. I have questions about where to find the HIN and what transmissions came with the 270 Crusader. I wouldn't mind any tips of things that I need to be looking at problem wise.

Thanks,

Todd

Views: 1787  •  Comments: 4  •  Write comments




  • Who is online?
  • In total there are 1096 users online :: 6 registered, 0 hidden and 1090 guests


  • Newest members


  • Statistics
  • Totals
    Total posts 68186
    Total topics 8195
    Total Announcements: 0
    Total Stickies: 4
    Total Attachments: 6673

    Topics per day: 2
    Posts per day: 14
    Users per day: 2
    Topics per user: 1
    Posts per user: 6
    Posts per topic: 8

    Total members 11569
    Our newest member Mariza

  •  Birthdays
  • No birthdays today
    In the next 30 days
    No members have a birthday within this period of time.

  • Sponsors