With winter coming the question is to winterize or not too winterize? I would like to use my carver 370 all year long is there anyway to safely do this during the cold whether.

Does anybody know where one can purchase MDPE pipe in the United States? My story begins with a clogged head in the aft stateroom on my maiden voyage with the new boat from Myrtle Beach to Charleston, SC my home port. The fluid level would not go down. I donned the wet gear to clean out the nasty's the previous owners had left, and took the Crown head apart. The head appeared operationally fine with a need for some new gaskets and impeller, but they were not the immediate issue. I pumped out the ...

So, I can't be the only 4207 owner out there that has wanted to install dual gas shocks on my engine room access/stairs.
I thought this might be a great winter project but I started to research " The extended length is the distance between point R and K (closed) in your calculation on the previous page in which this length must be long enough to include two stroke...." ......but wait maybe someone has already done the brain work.
So who out there has already installed them?

Hi Group, We just got our 1975 28' Carver Santa Cruz home. We purchased it in April in Portland, Or and trailered it to Boise, Id. (Another story) anyway we haven't had much time to get to know the boat also we didn't get to spend much time with the owner so we learning the systems on our own through trial and error. I went to operate the trim tabs so I could pressure wash then and I couldn't get them to work. There is two toggle switches one at the lower helm and one at the helm on the flybridg ...

Hello, looking for 350 in Northeast. Budget between 30 and 45k. Any boats or thoughts appreciated. Thanks

I have a 1979 Voyger 3326. The only way the engines can be worked on is to remove the stearn deck. Does anyone know the proper way to do it? I get it out but there must be an easier way.
Thanks

What does EOM mean in the owners manual?

I am looking at changing the thru hull discharge valve for my black water holding tank on my 1986, 3297 Mariner. I does not look very healthy. Can any one offer any insight. I will hire a pro for the job but would like to know about any common issues that might arise.
Thanks Gatehopper

This season, is coming to an end. I made my appointment to pull next Wednesday at 9 AM (10/28/2015). I went out onto Lake Erie for a final time. I piloted over to the fuel dock and I pumped out for the final time and I added the Stabil to my fuel tanks. I filled both tanks then took my final run on the lake to make sure the Stabilized fuel ran through both engines.



When I awoke it was dead calm no winds. I eyed the fuel dock but another boat beat me to the dock. For whatever reason he took over a ...

Greetings everyone,

As of last Tuesday, my wife and I are now proud owners of a 2003 Carver 360 Sport Sedan. Thanks Knot 10 Yacht Sales of Kent Narrows, MD.



We moved her from Kent Narrows, MD to Cypress Landing, NC on Wed, Thu, & Fri last week. The Chesapeake Bay was glass as was the crossing of the Albemarle Sound. Beautiful first trip and at 350 miles, the furthest we have traveled by pleasure boat.



Glad to be aboard the CY Owners forum and looking to years of fun & informative communicat ...