2006 396 MY with Volvo 8.1 Gi won’t throttle up past idle on the port engine. I swapped out the throttle body from the starboard engine and still had...
I have a 1997 Voyager 320 with twin 350 Crusaders at about 870 hours each, twice this year, upon starting, port engine started at 1300 rpm and would...
Hello !
1992 Carver 28 Raw water cooling. bought boat last fall. I noticed while under way that I had no hot water from faucet, I got hot water while...
My 2001 404 CPMY with a 7.4 Mercruiser developed a water leak and it seems the fitting on the fuel cooler drain plug has come off. I found it in the...
Can someone tell me if my V Drive is water cooled via a pump/propeller or by scupper under the hull? My starboard Drive is showing 98 degrees after a...
Trying to figure this out. By going with PleasureCraft engine plate(s) in our '76 Mariner '33 it appears I should have counter rotation 351 (5.8 std)...
I have a twinscan fo my twin 454 carved engine. It is about 5 years old. One side works great, the other side does not root GPH. The gauges does its...
The port prop shaft in my 1985 3207 with crusader 270s offers more resistance to turning than the starboard shaft. The starboard shaft rotates quite...
2000 Mercruiser 350 Mag MPI Horizon, MEFI 3 - Serial #OL394802
I’m trying to connect a fuel pressure tester to the schrader valve on the front/end of...
First time ATF change any pointers? Can I get all the fluid out with a suction type pump? Can I refill the fluid through the dipstick hole? Anything...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
Sponsors