Transducer Location Carver 500

Discussion of radars, GPS, autopilots, stereos and TV's. Also iPad and other mobile navigation devices.
Post Reply
User avatar
CatherineM
Scurvy Dog
Scurvy Dog
Posts: 2
Joined: September 22nd, 2024, 11:48 am
Vessel Info: 1996 Carver 500
Location: Vail, Co

Transducer Location Carver 500

Post by CatherineM »

I inherited a thru the hull transducer with my Carver 500 that was never installed. Where have my 500 peeps installed theirs on the hull?
Top
User avatar
trwestman
Scurvy Dog
Scurvy Dog
Posts: 36
Joined: August 7th, 2022, 8:18 pm
Vessel Info: 2002 Carver 506
Configured as a Soft-Top Bridge with Glass Aft-Deck
Cummins 450C (480hp) ~725 hours
Location: Lake of the Ozarks, MO
Has thanked: 16 times
Been thanked: 7 times

Re: Transducer Location Carver 500

Post by trwestman »

I have a 506 and the transducer is at the forward edge of the port engine and 2’ off the centerline (to port.) My manual shows the depth sounder transducer location as well. If you have your manual, look at the Thru-Hull Fittings section.
Tom
2002 506
Top
Post Reply

Return to “Electronics & Navigation”