Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

FREEDOM 20 ISSUE?

Discussion of batteries, chargers, wiring, generators, distribution panels, battery switches, etc.
User avatar

Topic author United States of America
CAPT.CHONIES
Scurvy Dog
Scurvy Dog
Posts: 2
Joined: November 22nd, 2016, 3:45 pm
Vessel Info: 2003 CARVER SUPERSPORT
Has thanked: 1 time

FREEDOM 20 ISSUE?

Postby CAPT.CHONIES » November 22nd, 2016, 3:51 pm

I HAVE A FREEDOM 20 INVERTER ON OUR VESSEL, RECENTLY WHEN I DISCONNECT SHORE POWER THE CONTROL PANEL SHOWS 0 BATTERY POWER WITH IN 5 MIN. AND SHUTS DOWN THE INVERTER. BATTERIES SEEM TO HAVE A FULL CHARGE BUT THE HOUSE BATTERY WILL NOT SHOW A CHARGE ON THE PANEL. ANY SUGGESTIONS?


Canada
Viper
CYO Supporter
CYO Supporter
Posts: 6044
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 458 times
Been thanked: 1699 times

Re: FREEDOM 20 ISSUE?

Postby Viper » November 22nd, 2016, 5:40 pm

CAPT.CHONIES wrote:Source of the post.......BATTERIES SEEM TO HAVE A FULL CHARGE......

What leads you to come to this conclusion?

If you haven't already done so, check the battery fluids, I suspect they're empty. If not empty, disconnect the batteries and test them with a good battery tester. Make sure all the connections are clean and tight to begin with. If everything checks out, use a meter to check how much the charger is outputting.

PS; welcome aboard :down:
User avatar

Topic author United States of America
CAPT.CHONIES
Scurvy Dog
Scurvy Dog
Posts: 2
Joined: November 22nd, 2016, 3:45 pm
Vessel Info: 2003 CARVER SUPERSPORT
Has thanked: 1 time

Re: FREEDOM 20 ISSUE?

Postby CAPT.CHONIES » November 22nd, 2016, 7:33 pm

thanks for the response, battery fluids are all good. and test good on a cheap tester, I will try a better one tomorrow.
User avatar

United States of America
mjk1040
Admiral
Admiral
Posts: 1523
Joined: July 30th, 2015, 8:15 am
Vessel Info: 1998 355 AC/MY "Deja Vu"
Location: Savannah, NY
Has thanked: 9 times
Been thanked: 243 times

Re: FREEDOM 20 ISSUE?

Postby mjk1040 » November 22nd, 2016, 8:09 pm

Ahoy my boating Carver Buddy! Thinking maybe your 13 year old Freedom 20 Inverter/Charger has an issue. Mike
Mike :down:
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow

Canada
Viper
CYO Supporter
CYO Supporter
Posts: 6044
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 458 times
Been thanked: 1699 times

Re: FREEDOM 20 ISSUE?

Postby Viper » November 22nd, 2016, 8:59 pm

A couple of things coming to mind;
- if when shore power is on you have no problem with 12 volt systems until you disconnect shore power at which time your 12 volt systems die, then one must assume the charger is working, or at least putting out enough to power things up. It may however not be putting out enough to actually charge a battery. Also, depending on how your system is wired, charger output may be powering up boat systems but may not be making it to the batteries. You may have charge breakers, check to ensure they're not tripped. Probably located close to the battery selector switch. You'll need to check with a meter to see if a charge voltage is getting to the batteries, and if so, how much is it outputting?
- does this also happen with the inverter function shut off?
- because things are being powered up, this shouldn't apply but worth a check; I believe there is a charge switch on the inverter. Ensure it is switched on
- as mentioned above, make sure you have good clean tight connections on the battery terminals. Check all positive and negative connections at the batteries and check the negative cable grounding at the engines.
- If a charge is getting to the batteries, and all connections are good ones, it's probably a battery issue. They may not be holding a charge and should be replaced. Do a load test on them and see how they hold up.

Return to “Electrical”



Who is online

Users browsing this forum: KyleR and 33 guests