I am in the process of purchasing a 1987 Carver 3607 aft cabin model. The boat will need to be moved about 400 kms. At the moment, I am trying to find the overall height of this model and not having any luck. It is not possible to do the measuring myself because I live far away. Also, since it is winter, the boat is buried under snow. I am looking for the measurements from the top of the helm on the fly bridge to the bottom keel. If someone would have any information to share, please reach out.
Thanks
Welcome to Carver Yachts Owners Forum
We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com
You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
3607 height
-
LakeTemisk
Topic author
- Scurvy Dog
- Posts: 2
- Joined: February 14th, 2025, 9:20 pm
- Vessel Info: 1987 Carver 3607 aft cabin
- Location: New Liskeard, ON
- Has thanked: 3 times
-
waybomb
- CYO Moderator
- Posts: 2517
- Joined: February 5th, 2013, 9:24 pm
- Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85 - Location: Saint Joseph,Mi
- Has thanked: 54 times
- Been thanked: 436 times
Re: 3607 height
Welcome aboard!
I can't help you with the height, but does the boat have a radar arch? Hardtop? Radar and other things on top?
If you are considering moving by trailer, they were delivered by the factory with the flybridge removed. Down to the roof of the cabin. Items from the bridge were stored inside the boat and on the foredeck.
Probably cheaper to move the boat via water if possible.
I can't help you with the height, but does the boat have a radar arch? Hardtop? Radar and other things on top?
If you are considering moving by trailer, they were delivered by the factory with the flybridge removed. Down to the roof of the cabin. Items from the bridge were stored inside the boat and on the foredeck.
Probably cheaper to move the boat via water if possible.
Thanks
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
-
bud37
- Admiral
- Posts: 4905
- Joined: April 23rd, 2015, 10:22 pm
- Has thanked: 583 times
- Been thanked: 1221 times
Re: 3607 height
Welcome to the forum......again no help with the measurements but.....boat transporters may have some data on heights if they have moved a year and model like yours. There will be things to remove.
To add make sure that at your destination there will be some way of getting it off the trailer if they don't deliver to the water or block it. My assumption is you are going to lake Temiskaming somewhere, make sure the destination can handle your boat for storage etc down the road. Good luck with your move. that is a nice area.
To add make sure that at your destination there will be some way of getting it off the trailer if they don't deliver to the water or block it. My assumption is you are going to lake Temiskaming somewhere, make sure the destination can handle your boat for storage etc down the road. Good luck with your move. that is a nice area.
FWIW.....The above is just my opinion..... 
-
km1125
- Admiral
- Posts: 3514
- Joined: February 28th, 2017, 6:04 pm
- Has thanked: 70 times
- Been thanked: 1053 times
Re: 3607 height
There are a few members on here who have moved their 3607's and might be able to weigh in.
I did not move mine via road, but can tell you the air draft is about 14' (with no radar arch or hardtop) and the water draft is 38". Remove the props and the rudders and the water draft probably drops to 26".
As noted earlier, when these move via roadways the bridge is removed from the cabin top. This involves the bridge surround, the helm and the bridge seating (three separate structures) and the helm seat. There are multi-pin connectors to disconnect most of the electrical wiring under the helm, but anything added or modified after it left the plant would likely need to be cut and spliced. The controls for throttle, transmission and steerage can be left connected but will need to be unbolted from the helm structure.
I did not move mine via road, but can tell you the air draft is about 14' (with no radar arch or hardtop) and the water draft is 38". Remove the props and the rudders and the water draft probably drops to 26".
As noted earlier, when these move via roadways the bridge is removed from the cabin top. This involves the bridge surround, the helm and the bridge seating (three separate structures) and the helm seat. There are multi-pin connectors to disconnect most of the electrical wiring under the helm, but anything added or modified after it left the plant would likely need to be cut and spliced. The controls for throttle, transmission and steerage can be left connected but will need to be unbolted from the helm structure.
-
LakeTemisk
Topic author
- Scurvy Dog
- Posts: 2
- Joined: February 14th, 2025, 9:20 pm
- Vessel Info: 1987 Carver 3607 aft cabin
- Location: New Liskeard, ON
- Has thanked: 3 times
Re: 3607 height
Thank you very much everyone for the information. It is greatly appreciated.
Phil
Phil
Return to “The Project Center”
Who is online
Users browsing this forum: No registered users and 19 guests
Sponsors