Need to replace the worn out anchor rope. Looks like 3/4 inch rope to me, any suggestions? I don't want to skimp here so no low quality recommendations just those that meet the need and any additional recommendations are fine.
Would love to go back to a chain windlass system but not this year.
Welcome to Carver Yachts Owners Forum
We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com
You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
Anchor Rope
-
swodog6289
Topic author - Scurvy Dog
- Posts: 15
- Joined: April 21st, 2014, 5:30 pm
- Vessel Info: "Open Arms"
36ft Carver 3607 Aft Cabin - Location: Luka, MS
-
AaHubb
- Commander
- Posts: 315
- Joined: February 16th, 2013, 5:46 pm
- Vessel Info: '99 404 CPMY
my twin diesel pusher - Location: Kennewick, Wa
- Has thanked: 15 times
- Been thanked: 61 times
Re: Anchor Rope
The primary factor is your windlass. What type/size rode is it setup for. Beyond that I believe three strand nylon with ~15' of chain is standard.
'99 404 CPMY
SeaDragon
SeaDragon
-
swodog6289
Topic author - Scurvy Dog
- Posts: 15
- Joined: April 21st, 2014, 5:30 pm
- Vessel Info: "Open Arms"
36ft Carver 3607 Aft Cabin - Location: Luka, MS
Re: Anchor Rope
Let's make sure my terms are straight. The winch pulls a 3/4 inch rope and it goes into a space forward of the forward stateroom.
When I opened it up, it looks like it collects in that locker.
So reading your reply, a 3/4 inch nylon rope should work then?
When I opened it up, it looks like it collects in that locker.
So reading your reply, a 3/4 inch nylon rope should work then?
-
AaHubb
- Commander
- Posts: 315
- Joined: February 16th, 2013, 5:46 pm
- Vessel Info: '99 404 CPMY
my twin diesel pusher - Location: Kennewick, Wa
- Has thanked: 15 times
- Been thanked: 61 times
Re: Anchor Rope
Yup. If what you have now works and is just worn or frayed then replace with same. My understanding on the windlass is the rode size/type needs to match the spools. Not sure how to tell what you have, maybe someone more in the know will chime in.
'99 404 CPMY
SeaDragon
SeaDragon
-
swodog6289
Topic author - Scurvy Dog
- Posts: 15
- Joined: April 21st, 2014, 5:30 pm
- Vessel Info: "Open Arms"
36ft Carver 3607 Aft Cabin - Location: Luka, MS
Re: Anchor Rope
@AaHubb, thanks for the info, hopefully more will weigh in.
-
Lyndon670
- Admiral
- Posts: 657
- Joined: July 29th, 2013, 11:35 pm
- Vessel Info: 2000 Carver 506
Volvo TAMD74EDC - Location: Georgian Bay
- Has thanked: 124 times
- Been thanked: 140 times
Re: Anchor Rope
If you can, ALWAYS better to go chain/rope or all chain. Especially in your boat and you do any overnighting. Check your windlass to see if it will accept it, it's literally night and day.
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
Return to “General Boating Discussion”
Who is online
Users browsing this forum: No registered users and 22 guests
Sponsors