2000 Carver 506 - Rear Port Shore Power

[bud37]

Is the id tag still on the back....should have model/serial # etc......then you can check Carling or Blue Sea systems site for size etc. hopefully some more info there. Good luck....

[km1125]

QR_BBPOST Thanks KM1125. I finally was able to do more testing. Probed the circuit breaker on swimplatform and one of the HOT is not getting a full 110V. I removed the circuit breaker but it has no marking on what amp it is.

Anyone know what size circuit breaker I need

It’s a carlingswich breaker

There's no printing on the side of that breaker? All the Carlings I seen have been pretty well stamped on the side.

[KuyaJunGarage]

Unfortanetly none. I gave blueseal a call, bought the 50amp breaker

[KuyaJunGarage]

Well guys, I believe I finally figured it out. Its my shore power plug, bought a new one on amazon. Sheez

First I thought it was the breaker but I did a voltage test on the 50amp 1 black hot and 1 red Hot. Red has 120v black has 16.5v... Boom its my plug or cord.
going to replace the plug end this weekend.....

[RambleOn506]

Hi Paulr, how are you testing the shore power pedestal? Just with a multimeter? L-N and L-N? Or do you have a special plug?

I haven't had this specific issue, but shore power connections on my 2000 506 have tripped the breaker at a couple marinas in the past year. Particularly when we were coming up the Tenn-Tom from the Gulf to Kentucky Lake. Would also like to know the breaker. I'll check my Carver inventory sheet when I'm on the boat in a couple of weeks.

Thx CRO

[trwestman]

Mine is 50amp.