Cable length

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
Post Reply
User avatar
throwback2
First Mate
First Mate
Posts: 125
Joined: January 13th, 2014, 10:38 am
Vessel Info: 1987 Carver 28 Voyager,twin small blocks,1991 Shamrock,350 Chevy now.
1973 Atlantic Craft 15, 2004 2 smoke Merc 40,
and a few other water toys
Has thanked: 8 times
Been thanked: 23 times

Cable length

Post by throwback2 »

Hello all,I have a 1987 Carver 28 Voyager and am trying to find control cable length for starboard transmission shifter.These are from fly bridge to transmission.The cable that is there has no markings.
Viper
CYO Supporter
CYO Supporter
Posts: 6266
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 475 times
Been thanked: 1791 times

Re: Cable length

Post by Viper »

Cables are usually stamped at one of the ends with a number that includes the length. If you can't find that, my recommendation is to remove the cable and measure it. Before you do that though, ensure first that it is routed properly in case you have to adjust the length. You don't want it to be too short or too long, and you don't want any tight turns.
User avatar
bud37
Admiral
Admiral
Posts: 5182
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 604 times
Been thanked: 1312 times

Re: Cable length

Post by bud37 »

throwback2 wrote:QR_BBPOST Hello all,I have a 1987 Carver 28 Voyager and am trying to find control cable length for starboard transmission shifter.These are from fly bridge to transmission.The cable that is there has no markings.
Does your boat have the lower helm station ?
FWIW.....The above is just my opinion.
User avatar
throwback2
First Mate
First Mate
Posts: 125
Joined: January 13th, 2014, 10:38 am
Vessel Info: 1987 Carver 28 Voyager,twin small blocks,1991 Shamrock,350 Chevy now.
1973 Atlantic Craft 15, 2004 2 smoke Merc 40,
and a few other water toys
Has thanked: 8 times
Been thanked: 23 times

Re: Cable length

Post by throwback2 »

bud37 wrote:QR_BBPOST
throwback2 wrote:QR_BBPOST Hello all,I have a 1987 Carver 28 Voyager and am trying to find control cable length for starboard transmission shifter.These are from fly bridge to transmission.The cable that is there has no markings.
Does your boat have the lower helm station ?
No lower station.
User avatar
throwback2
First Mate
First Mate
Posts: 125
Joined: January 13th, 2014, 10:38 am
Vessel Info: 1987 Carver 28 Voyager,twin small blocks,1991 Shamrock,350 Chevy now.
1973 Atlantic Craft 15, 2004 2 smoke Merc 40,
and a few other water toys
Has thanked: 8 times
Been thanked: 23 times

Re: Cable length

Post by throwback2 »

Well,here's what length the shifter cables are;36 feet on starboard side 34 feet,port side.Smooth as silk again.
Post Reply