Welcome to Carver Yachts Owners Forum

We are a boating forum for owners of Carver Yachts to enthusiastically discuss all aspects of Carver Boat ownership. Whether you are looking for your first Carver or currently own one, you are sure to feel at home on CarverYachtOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Boat will not steer, wheel spins freely

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
User avatar

strokerking
Scurvy Dog
Scurvy Dog
Posts: 5
Joined: July 30th, 2013, 6:38 pm
Vessel Info: 1981 Carver Aft Cabin

Re: Boat will not steer, wheel spins freely

Postby strokerking » August 15th, 2013, 4:27 pm

1981 Carver Aft Cabin ~ Fly bridge ~What turns the pump on for the hydraulic steering? Does the ignition turn the electric hydraulic pump on or is it activated by something else? Any help is appreciated.

User avatar

United States of America
waybomb
CYO Moderator
CYO Moderator
Posts: 2501
Joined: February 5th, 2013, 9:24 pm
Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85
Location: Saint Joseph,Mi
Has thanked: 53 times
Been thanked: 426 times

Re: Boat will not steer, wheel spins freely

Postby waybomb » August 15th, 2013, 4:39 pm

Your steering wheel is connected to it - you turn it when you turn the wheel.

Take a picture of the backside, or just tell us if there is two hoses or three.

Then I can link you to a parts explosion and you'll see what I am talking about.
Thanks
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
User avatar

strokerking
Scurvy Dog
Scurvy Dog
Posts: 5
Joined: July 30th, 2013, 6:38 pm
Vessel Info: 1981 Carver Aft Cabin

Re: Boat will not steer, wheel spins freely

Postby strokerking » August 16th, 2013, 6:20 pm

I have found the reservoir and the pump. It is a 3 tube hydraulic system. The pump doesn't seem to be coming on. What activates the pump?
User avatar

United States of America
waybomb
CYO Moderator
CYO Moderator
Posts: 2501
Joined: February 5th, 2013, 9:24 pm
Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85
Location: Saint Joseph,Mi
Has thanked: 53 times
Been thanked: 426 times

Re: Boat will not steer, wheel spins freely

Postby waybomb » August 17th, 2013, 7:56 am

If you found a pump, it would be a pump for an autopilot. Do you have, or did the boat have, an autopilot?
The pump only works when you give your vessels control to the autopilot.
The pump that moves the fluid is on your steering wheel.

Verify there is air pressure in the reservoir. There is a valve very similar to a tire valve. Depress it for a second.if air comes out, the gage good. You should some pressure, twenty five is spec I believe.

The bleeding procedure is to turn the steering wheel in one direction at least 75 turns in one direction, or until you get good resistance. Than 75 the other way. This may take five minutes, this may take for hours.
Thanks
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
User avatar

strokerking
Scurvy Dog
Scurvy Dog
Posts: 5
Joined: July 30th, 2013, 6:38 pm
Vessel Info: 1981 Carver Aft Cabin

Re: Boat will not steer, wheel spins freely

Postby strokerking » August 17th, 2013, 9:01 am

thank you.I think this will do it .

Return to “General Repairs & Maintenance”



Who is online

Users browsing this forum: Chiefguns, Google [Bot], Google Adsense [Bot] and 92 guests