How can I get access to the v drives
I can’t even reach the oil dip stick
Does this model have any panels to remove to service the transmission
Crawling behind the twin crusaders is not my best option
3297 1988 Transmission acess
- waybomb
- CYO Moderator

- Posts: 2745
- Joined: February 5th, 2013, 9:24 pm
- Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85 - Location: Saint Joseph,Mi
- Has thanked: 69 times
- Been thanked: 492 times
Re: 3297 1988 Transmission acess
Can't speak for 3297, but 3697 one hatch has the dinette table on it. Lift off the table from the poles and use the poles as leverage to open the hatch which swings toward the middle of the boat. The port side has a floor cover you can lift up. Both are right over the v drive.
Thanks
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
- Yoeman
- Scurvy Dog

- Posts: 14
- Joined: April 17th, 2025, 10:34 am
- Vessel Info: Carver Mariner 32
1988
Gifted to me
Needs work
220 hp - Location: Surrey BC
- Has thanked: 1 time
- Been thanked: 1 time
Re: 3297 1988 Transmission acess
I’m thinking it must be the same
Back to the boat tomorrow
Water heater won’t come out so may try lifting the complete stern cover
Ice maker leaks at valve so will find that issue
Sliding doors and screen slide poorly
Ugly stripes need to come off!
Big day
Thanks
Back to the boat tomorrow
Water heater won’t come out so may try lifting the complete stern cover
Ice maker leaks at valve so will find that issue
Sliding doors and screen slide poorly
Ugly stripes need to come off!
Big day
Thanks
- Yoeman
- Scurvy Dog

- Posts: 14
- Joined: April 17th, 2025, 10:34 am
- Vessel Info: Carver Mariner 32
1988
Gifted to me
Needs work
220 hp - Location: Surrey BC
- Has thanked: 1 time
- Been thanked: 1 time
Re: 3297 1988 Transmission acess
Nothing under the table
I can’t even see the dip stick to check the fluid level
I can’t even see the dip stick to check the fluid level
-
Viper
- CYO Supporter

- Posts: 6266
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 475 times
- Been thanked: 1791 times
Re: 3297 1988 Transmission acess
I don't think it's as far forward as the table. Look in the bottom of the aft dinette bench and see if there is an access hatch.
- Yoeman
- Scurvy Dog

- Posts: 14
- Joined: April 17th, 2025, 10:34 am
- Vessel Info: Carver Mariner 32
1988
Gifted to me
Needs work
220 hp - Location: Surrey BC
- Has thanked: 1 time
- Been thanked: 1 time
Re: 3297 1988 Transmission acess
I would love to chat with a 3297 owner that can tell me if lifting the entire hatch frame is the only way to have better access to the back of the crusaders and v drives.
I dropped the oil filter today and it was tough to get it out from under the under v drive.
Any ideas
I dropped the oil filter today and it was tough to get it out from under the under v drive.
Any ideas