Hi all
Just closed on a 2005 Carver 44MY ES and just had a few questions, As you can imagine, i looked at many boats and once I narrowed my search I looked into everything Carver. I have some questions about the boat I purchased and others of the same year and what I thought was the same model. The first level you walk up to, has a bump out and a built in seat, some do not?? As you enter the cabin, my flat screen is hanging up above the AC and DC breaker panels on the left with the Stereo and DVD controls to its right. Other models have the TV on the right as you walk in with the DVD and Stereo controls above??? Our boat had three bilge pumps, forward, mid, and aft but the Carver Manuel says there are only two, forward and aft?? None of this of course are complainants or problems, just trying to figure out what specific model we have.Thank You
2005 Carver 44 MY
- Ramsport47
- Commander

- Posts: 376
- Joined: February 10th, 2013, 7:13 am
- Vessel Info: 1998 Carver 310 Santego
- Has thanked: 72 times
- Been thanked: 59 times
Re: 2005 Carver 44 MY
I don't have one of these, but did work for a Carver dealer for many years. On the 396 and 444 Motor Yachts (cabins are the same), there were two different interior layouts. One was the standard layout where the galley was more isolated from the salon and the Extended Salon version which had the galley basically in the same location but didn't have the counter portion that protruded into the salon area. It gave more seating as well. I don't remember how the TV and such were as the galley was the main selling difference. As far as bilge pumps, there would be three from the factory on a Carver aft cabin...one in the fwd bilge, one in the engine bilge and one in the aft cabin bilge. It may be that one would be automatic only...no switch at the dash.
Kenny
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio
-
Viper
- CYO Supporter

- Posts: 6266
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 475 times
- Been thanked: 1791 times
- DanM
- Deck Hand

- Posts: 96
- Joined: February 8th, 2013, 5:49 pm
- Vessel Info: Carver 396
- Location: Lake Michigan
- Has thanked: 7 times
- Been thanked: 35 times
Re: 2005 Carver 44 MY
The bump out on the aft deck came in 2005. It provided additional cockpit space since your backside was positioned in the bump out section. Prior to that, the aft deck seating was created by loose furniture. You also lost the hawse pipe on either side of the aft deck when they made the change. The TV was moved sometime after the 2004 model year.
Dan
Carver 396
SugarSand Tango
Carver 396
SugarSand Tango

