Holding Tank
-
bpritchett
- Scurvy Dog
- Posts: 7
- Joined: January 3rd, 2018, 2:17 pm
- Vessel Info: 1985 Carver Mariner 3697
- Has thanked: 1 time
Holding Tank
New owner of 1985 Carver Mariner 3697, like so far, can anyone tell me if the boat has a holding tank gauge and if so where is it located and what size is the pump out adapter?
-
tomschauer
- Admiral
- Posts: 2323
- Joined: March 28th, 2016, 10:52 pm
- Vessel Info: 1998 Carver 355
Suspicious Fishes !
2022 Kawasaki 310X - Location: upper chesapeake bay
- Has thanked: 326 times
- Been thanked: 602 times
Re: Holding Tank
if you have a tank level indicator, It would most likely located in the head compartment. If you didn't see one you probably don't have it.
Your deck fitting will either be 1 1/4 or 1 1/2 FIP. Carver seems to have liked 1 1/4 for some reason. Most pump out stations don't have this size.
Your deck fitting will either be 1 1/4 or 1 1/2 FIP. Carver seems to have liked 1 1/4 for some reason. Most pump out stations don't have this size.
-
mjk1040
- Admiral
- Posts: 1531
- Joined: July 30th, 2015, 8:15 am
- Vessel Info: 1998 355 AC/MY "Deja Vu"
- Location: Savannah, NY
- Has thanked: 9 times
- Been thanked: 248 times
Re: Holding Tank
Do not believe that year had monitors unless it was installed after market by a previous owner. Also, you have a black water tank (toilet tank) and a gray water tank (sink & shower drain tank) that can be by passed and the grey water can be pumped overboard or into the grey water tank that can be pumped off.
Mike 
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow
Sponsors