New Member 85 Riviera 28

Are you a new member? Stop in and say hi!
Post Reply
User avatar
tomtomterrific
Scurvy Dog
Scurvy Dog
Posts: 6
Joined: August 1st, 2018, 7:01 am
Vessel Info: 1986 carver riviera 28
Location: lloyd harbor ny
Has thanked: 14 times

New Member 85 Riviera 28

Post by tomtomterrific »

Ahoy Mates!

New member here. Just brought my "new" Riviera from Mamaroneck NY to it's new home port of Lloyd Harbor NY today. Love the boat and it's been very well maintained and ran great. One of the front vent windows was (intentionally) sealed shut. I want to restore it to operate so here's my question...

Has anyone ever retrofit a locking rod or something similar to make it easier top open and close? I had a 35 foot CHB Trawler that had this kind of mechanism on the center front window, You would unset the knob and push the rod forward top open the bottom of the window and reset the knob to hold it open. Seems the vent windows are pretty hard to reach otherwise.

Any other tips/tricks from Riveiera 28 owners?

Cheers!

Tom
Viper
CYO Supporter
CYO Supporter
Posts: 6266
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 475 times
Been thanked: 1791 times

Re: New Member 85 Riviera 28

Post by Viper »

Congrats and welcome aboard Tom.
User avatar
waybomb
CYO Moderator
CYO Moderator
Posts: 2745
Joined: February 5th, 2013, 9:24 pm
Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85
Location: Saint Joseph,Mi
Has thanked: 69 times
Been thanked: 492 times

Re: New Member 85 Riviera 28

Post by waybomb »

Our first boat was a Riviera, great boat!
Ours had a mechanism I think you described.
Maybe somebody removed yours or it didn't become a standard item until later years? Ours was a 1988.
Thanks
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
User avatar
bud37
Admiral
Admiral
Posts: 5184
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 604 times
Been thanked: 1312 times

Re: New Member 85 Riviera 28

Post by bud37 »

Welcome to the forum and Carver......the old Trojans had a winding type device, some Chriscraft as well, maybe a boat salvage yard and you get all the bits to fab one up, good luck with it, I always liked that model.
FWIW.....The above is just my opinion.
User avatar
tomtomterrific
Scurvy Dog
Scurvy Dog
Posts: 6
Joined: August 1st, 2018, 7:01 am
Vessel Info: 1986 carver riviera 28
Location: lloyd harbor ny
Has thanked: 14 times

Re: New Member 85 Riviera 28

Post by tomtomterrific »

Thanks Guys,

Another Newb question...

Are the bilge pumps wired directly to the battery from the factory? The boat has all the factory panel and dash switches.

Q - When the main panel is totally off, and the battery switch is set to off, with the dash switches set to "automatic" will the bilge pumps run?

Thanks,

Tom
Viper
CYO Supporter
CYO Supporter
Posts: 6266
Joined: July 10th, 2015, 9:58 pm
Vessel Info: 1989 Carver 3807 Aft Cabin
Location: Ontario, Canada
Has thanked: 475 times
Been thanked: 1791 times

Re: New Member 85 Riviera 28

Post by Viper »

In theory yes the pumps will run however it's always best to check for yourself as there is no telling what a previous owner/s may have done over the years. For this reason, you shouldn't assume anything, rather you should confirm that a system is operating or hooked up the way it should be by recommended standards just in case. Best be safe than sorry.
User avatar
SplashyLady
Captain
Captain
Posts: 267
Joined: January 5th, 2016, 10:02 am
Vessel Info: Carver 3227 Sedan Convertible
1986 - 260 Mercruisers - Kohler 5E
Location: Lake Norman, NC
Has thanked: 20 times
Been thanked: 88 times

Re: New Member 85 Riviera 28

Post by SplashyLady »

Something like this:

https://www.ebay.com/itm/16-Marine-Boat ... Desc=0%7C0

This is more like the style used on the old Chris-Crafts:
https://www.ebay.com/itm/2-x-Hatch-Stay ... Desc=0%7C0
Captain John
Past Commodore, Peninsula Yacht Club
Lake Norman, NC
Carver 3227 - "Splashy Lady"
Aquasport 222CCP - "Gone Fission"
User avatar
RGrew176
Admiral
Admiral
Posts: 6652
Joined: August 17th, 2015, 4:07 am
Vessel Info: 2023 SunTracker Party Barge 22 DLX
Location: Southgate, MI.
Has thanked: 72 times
Been thanked: 470 times

Re: New Member 85 Riviera 28

Post by RGrew176 »

Welcome Aboard. Good luck with your Riviera.
Rick Grew

2025 Godfrey Xperience 2286 SFLX

2004 Past Commodore
West River Yacht & Cruising Club
User avatar
pepmyster
Admiral
Admiral
Posts: 1035
Joined: June 5th, 2018, 7:17 am
Vessel Info: 2004 Carver 360 Sport Sedan
8.1 Volvo Penta
Fresh water boating
Location: Ottawa
Has thanked: 492 times
Been thanked: 211 times

Re: New Member 85 Riviera 28

Post by pepmyster »

Congrats and welcome!!!!!!
Post Reply