Looking for galley sink replacement
- valoos
- Scurvy Dog

- Posts: 6
- Joined: October 3rd, 2014, 2:19 pm
- Vessel Info: 1981 Carver 3607 Aft Cabin "FOOTLOOSE"
Twin Pleasurecraft 225 hp V-8 diesels - Location: Stuart, FL
- Lyndon670
- Admiral

- Posts: 657
- Joined: July 29th, 2013, 11:35 pm
- Vessel Info: 2000 Carver 506
Volvo TAMD74EDC - Location: Georgian Bay
- Has thanked: 124 times
- Been thanked: 140 times
Re: Looking for galley sink replacement
You will not find a direct fit replacement sink, unless you can visit a wrecker yard. I replaced the galley sink and the head sink in my Silverton with two that I ordered from Home Depot. The barsink size will be fairly close.
It's a good time to redo your counter top too!
It's a good time to redo your counter top too!
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
- waybomb
- CYO Moderator

- Posts: 2745
- Joined: February 5th, 2013, 9:24 pm
- Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85 - Location: Saint Joseph,Mi
- Has thanked: 69 times
- Been thanked: 492 times
Re: Looking for galley sink replacement
Great Lakes skipper on ebay is a fantastic source. They also have a store in Franklin Wisconsin called kendors.
Also a great time to install granite and a real faucet.
Also a great time to install granite and a real faucet.
Thanks
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
- PNGTaubada
- Scurvy Dog

- Posts: 16
- Joined: August 12th, 2013, 8:32 pm
- Vessel Info: Carver 466 MY 2002
- Has thanked: 1 time
- Contact:
Re: Looking for galley sink replacement
If it's just dull and no damage to the ceramic, you can get rejuvenator kits that will save you lots of $
- Mommaboyd
- Scurvy Dog

- Posts: 1
- Joined: June 8th, 2016, 1:59 am
- Vessel Info: 2001 Carver 396
Cummins deisel - Location: San Diego, CA
- Has thanked: 2 times
Re: Looking for galley sink replacement
Waybomb, did you replace all granite? Was yours "sandwiched" in between counters and end tables like ours is? (2001 396)
- waybomb
- CYO Moderator

- Posts: 2745
- Joined: February 5th, 2013, 9:24 pm
- Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85 - Location: Saint Joseph,Mi
- Has thanked: 69 times
- Been thanked: 492 times
Re: Looking for galley sink replacement
I installed granite, well, had it installed. I took the drop edge off, and installed the granite right on top of the old formica tops.
I have pix in my album in the sig.
We decided that having all that surface area to glue to instead of just the edges of the cabinets would be a good idea.
So the top of the counter is now about 1.5" higher that original.
I have pix in my album in the sig.
We decided that having all that surface area to glue to instead of just the edges of the cabinets would be a good idea.
So the top of the counter is now about 1.5" higher that original.
Thanks
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft