What is it??
- Peter3607
- Scurvy Dog

- Posts: 49
- Joined: August 29th, 2019, 9:44 pm
- Vessel Info: 1998 Carver 500 CMY
1989 Carver 3607 Aft Cabin - Location: Ontario
- Has thanked: 29 times
- Been thanked: 2 times
What is it??
While cleaning my engine room bilge, I found this guy at the bottom. Any idea what it is used for?
You do not have the required permissions to view the files attached to this post.
- AaHubb
- Commander

- Posts: 315
- Joined: February 16th, 2013, 5:46 pm
- Vessel Info: '99 404 CPMY
my twin diesel pusher - Location: Kennewick, Wa
- Has thanked: 15 times
- Been thanked: 61 times
Re: What is it??
That's a service plug to keep your boat from sinking when servicing the paddle wheel sensor.
Also known as a whats'it.
..Aaron
Also known as a whats'it.
..Aaron
'99 404 CPMY
SeaDragon
SeaDragon
-
Viper
- CYO Supporter

- Posts: 6267
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 475 times
- Been thanked: 1791 times
Re: What is it??
As Aaron mentioned it's a plug for the thru-hull fitting of a transducer. This type of system allows you to remove the transducer element while in the water, and allows you to insert this plug in its place while the transducer gets serviced. The plug should always be tied off or close to the thru-hull fitting so it's always on hand in case of emergency.
The housing in the hull also usually has a valve that closes automatically when the element or plug is removed. The closed valve isn't water proof so you'll get a bit of water coming in when the ducer or plug is removed but gives you time for replacement without taking on a full column of water.
The housing in the hull also usually has a valve that closes automatically when the element or plug is removed. The closed valve isn't water proof so you'll get a bit of water coming in when the ducer or plug is removed but gives you time for replacement without taking on a full column of water.
- pepmyster
- Admiral

- Posts: 1035
- Joined: June 5th, 2018, 7:17 am
- Vessel Info: 2004 Carver 360 Sport Sedan
8.1 Volvo Penta
Fresh water boating - Location: Ottawa
- Has thanked: 492 times
- Been thanked: 211 times
- ColRon
- Admiral

- Posts: 581
- Joined: April 24th, 2017, 6:06 pm
- Vessel Info: 1989 Carver Santego 3867
“Escape Plan” - Location: Murray, KY
- Has thanked: 77 times
- Been thanked: 157 times
Re: What is it??
Don’t feel bad Pep, I thought it was funny!
Ron
1989 Carver Santego 3867
“Escape Plan”
Murray, KY

1989 Carver Santego 3867
“Escape Plan”
Murray, KY
-
Viper
- CYO Supporter

- Posts: 6267
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 475 times
- Been thanked: 1791 times
- Peter3607
- Scurvy Dog

- Posts: 49
- Joined: August 29th, 2019, 9:44 pm
- Vessel Info: 1998 Carver 500 CMY
1989 Carver 3607 Aft Cabin - Location: Ontario
- Has thanked: 29 times
- Been thanked: 2 times
- RGrew176
- Admiral

- Posts: 6652
- Joined: August 17th, 2015, 4:07 am
- Vessel Info: 2023 SunTracker Party Barge 22 DLX
- Location: Southgate, MI.
- Has thanked: 72 times
- Been thanked: 470 times
Re: What is it??
Actually it was funny. I laughed. 
Rick Grew
2025 Godfrey Xperience 2286 SFLX
2004 Past Commodore
West River Yacht & Cruising Club
2025 Godfrey Xperience 2286 SFLX
2004 Past Commodore
West River Yacht & Cruising Club