Fuel pump for Generator
-
jsurfwhite
- Scurvy Dog
- Posts: 28
- Joined: June 15th, 2020, 4:12 pm
- Vessel Info: 2000 Carver 356 Aft Deck
- Location: Florida
- Has thanked: 12 times
- Been thanked: 4 times
Fuel pump for Generator
I have a Kohler 7.3e generator. The fuel pump is badly corroded and needs to be replaced. My manual does not list the part number. My search so far has found Facet 278490. Can someone confirm that number? I have had a few misses on part number cross references that resulted in repair delays and returned parts. Thanks
-
tomschauer
- Admiral
- Posts: 2323
- Joined: March 28th, 2016, 10:52 pm
- Vessel Info: 1998 Carver 355
Suspicious Fishes !
2022 Kawasaki 310X - Location: upper chesapeake bay
- Has thanked: 326 times
- Been thanked: 602 times
-
KeithS
- Scurvy Dog
- Posts: 35
- Joined: May 29th, 2020, 2:34 pm
- Vessel Info: 2005 38SS
- Location: Oceanport NJ
- Been thanked: 23 times
Re: Fuel pump for Generator
278490 is the correct Kohler part number for the pump. It is made by Faucet but be careful to get the correct pump if you get it aftermarket. Faucet makes several versions of that pump that are identical on the outside but have different ratings. Putting in a pump that has 7 psi instead of the 2 psi can cause the carb to run rich and flood.
-
jsurfwhite
- Scurvy Dog
- Posts: 28
- Joined: June 15th, 2020, 4:12 pm
- Vessel Info: 2000 Carver 356 Aft Deck
- Location: Florida
- Has thanked: 12 times
- Been thanked: 4 times
Re: Fuel pump for Generator
Any tips on the installation? How do I prevent fuel from siphoning from the fuel tank? Thanks.
-
tomschauer
- Admiral
- Posts: 2323
- Joined: March 28th, 2016, 10:52 pm
- Vessel Info: 1998 Carver 355
Suspicious Fishes !
2022 Kawasaki 310X - Location: upper chesapeake bay
- Has thanked: 326 times
- Been thanked: 602 times
Re: Fuel pump for Generator
You have an anti siphon valve at the tank, you should only lose the fuel in the line.
I would also order the small metal cartridge fuel filter and replace at the same time.
Make sure you connect the power plug correctly. If you reverse the polarity, your pump will run backwards and not pump enough fuel to keep the genny running. Don't ask how i know this!
I would also order the small metal cartridge fuel filter and replace at the same time.
Make sure you connect the power plug correctly. If you reverse the polarity, your pump will run backwards and not pump enough fuel to keep the genny running. Don't ask how i know this!
Sponsors