SIDESHIFTER getting closer to reality

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
Post Reply
User avatar
tonyiiiafl
Admiral
Admiral
Posts: 902
Joined: November 19th, 2015, 4:00 am
Vessel Info: 1994 Carver 39 Cockpit Motor Yacht
Location: Cape Cod, MA
Has thanked: 601 times
Been thanked: 193 times

SIDESHIFTER getting closer to reality

Post by tonyiiiafl »

Today I found a space under the forward berth to hold the two batteries for the Sideshifter. Only a 4’ cable run. I am going to use one of the storage drawers below the berth to house the solenoid, switch, etc. I have used a piece of AZEK mounted to the inside of teh draw unit, and have it sitting on teh chine. I also took a piece of AZEK and cut it at a 30 degree angle. I am going to 5200 it to the interior of the hull for safe keeping. Also, got the control mounted on the helm as well. Pretty tough to get it in there as real estate was at a premium. However, one step closer. ALso, organized and too a lot of stuff off. Move. in next weekend.
6E9956CD-B2AC-4641-82A0-8904FC0EE5F5.jpeg
9D3FC5EB-8AA3-453B-902F-C640E5F007C3.jpeg
0A8F36B0-9F1D-452F-94CC-A43DF5641E89.jpeg
7A1859F2-1B78-409D-AC50-36EE5DD89FE6.jpeg
57952F93-8156-4770-9A5F-09C7681EC36F.jpeg
1136769C-DC9E-4D26-A72B-53184C59AEB8.jpeg
76C0D85E-BF3D-4096-B1EB-018A8924EF55.jpeg
You do not have the required permissions to view the files attached to this post.
User avatar
bud37
Admiral
Admiral
Posts: 5184
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 604 times
Been thanked: 1312 times

Re: SIDESHIFTER getting closer to reality

Post by bud37 »

There is always a way......... :popcorn:
FWIW.....The above is just my opinion.
User avatar
tonyiiiafl
Admiral
Admiral
Posts: 902
Joined: November 19th, 2015, 4:00 am
Vessel Info: 1994 Carver 39 Cockpit Motor Yacht
Location: Cape Cod, MA
Has thanked: 601 times
Been thanked: 193 times

Re: SIDESHIFTER getting closer to reality

Post by tonyiiiafl »

yes Bud, just had to look at it for awhile, and save the beer for later on! I am going to put the charger in the hanging locker to port that i just put a shelf it. Possibly all the sideshift solonoid and switches and gear. That way I have easy access and can look at it when I need to. It is a better idea than putting into a drawer under the front berth.
User avatar
bud37
Admiral
Admiral
Posts: 5184
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 604 times
Been thanked: 1312 times

Re: SIDESHIFTER getting closer to reality

Post by bud37 »

My experience, the two things that are handy to get at and see easily are the switch that has the volts readout led and the replaceable fuse.....really all that control equipment doesn't take up much room.....good luck.... :down:
FWIW.....The above is just my opinion.
User avatar
g36
Admiral
Admiral
Posts: 2115
Joined: April 7th, 2014, 6:07 pm
Vessel Info: 1997 Carver 405
Location: Soddy Daisy TN.
Has thanked: 7 times
Been thanked: 654 times

Re: SIDESHIFTER getting closer to reality

Post by g36 »

I think there's a couple beers heading your way soon.
1997 Carver 405
Crusader xli
The Black Pearl
Soddy Daisy Tn.
User avatar
tonyiiiafl
Admiral
Admiral
Posts: 902
Joined: November 19th, 2015, 4:00 am
Vessel Info: 1994 Carver 39 Cockpit Motor Yacht
Location: Cape Cod, MA
Has thanked: 601 times
Been thanked: 193 times

Re: SIDESHIFTER getting closer to reality

Post by tonyiiiafl »

I can taste them already. I have to say, Side Shift customer service is over the top!
User avatar
tonyiiiafl
Admiral
Admiral
Posts: 902
Joined: November 19th, 2015, 4:00 am
Vessel Info: 1994 Carver 39 Cockpit Motor Yacht
Location: Cape Cod, MA
Has thanked: 601 times
Been thanked: 193 times

Re: SIDESHIFTER getting closer to reality

Post by tonyiiiafl »

AND here is the power for that Side Shift. Interstate AGM, 900CCA to make the 24V. Truly bada$$ batteries! Good price too at $195.00 each and 3 year replacement warranty
16717764-9FFF-4AEF-9E9C-A3EAA88A43BD.jpeg
CAF401C4-A246-4D6B-99B0-46FF1AB19B4F.jpeg
You do not have the required permissions to view the files attached to this post.
Post Reply