Add Circuit for Aft Deck Lights

Discussion of batteries, chargers, wiring, generators, distribution panels, battery switches, etc.
Post Reply
User avatar
Mikwallace
First Mate
First Mate
Posts: 102
Joined: August 14th, 2020, 12:22 am
Vessel Info: 1998 Carver 405 AC 7.4 Horizon engines
Location: Lake Guntersville, AL
Has thanked: 117 times
Been thanked: 23 times

Add Circuit for Aft Deck Lights

Post by Mikwallace »

I’d like to add more lights but a different color to the Aft Deck overhead lights. The current switch operates two overhead lights. I’d like to change the switch to a SPDT but can’t figure out how to route the wire from switch to lights? The current switch is starboard of the salon access doors (picture attached).
IMG_5604.jpeg
You do not have the required permissions to view the files attached to this post.
1959 Larson 16’
1979 Caravelle 18’
1998 Chaparral 2330 7.4 L Mercruiser
2003 Chaparral 260 Ssi 8.1 L VolvoPenta DuoProp
1998 Carver 405 AC 7.4 Horizons
:captain2:
:usa:
User avatar
g36
Admiral
Admiral
Posts: 2115
Joined: April 7th, 2014, 6:07 pm
Vessel Info: 1997 Carver 405
Location: Soddy Daisy TN.
Has thanked: 7 times
Been thanked: 654 times

Re: Add Circuit for Aft Deck Lights

Post by g36 »

On my 405 I thought about the same thing. I wanted to have red light and white light options. I found these bi color leds that plug into the existing fixture and no wiring involved. So I now have my 2 colors by simply toggling the existing switch...https://www.apexlighting.com/accessorie ... lUQAvD_Bwe

Or here with other color options.....https://www.superbrightleds.com/g4-led- ... 130-lumens
1997 Carver 405
Crusader xli
The Black Pearl
Soddy Daisy Tn.
User avatar
Mikwallace
First Mate
First Mate
Posts: 102
Joined: August 14th, 2020, 12:22 am
Vessel Info: 1998 Carver 405 AC 7.4 Horizon engines
Location: Lake Guntersville, AL
Has thanked: 117 times
Been thanked: 23 times

Re: Add Circuit for Aft Deck Lights

Post by Mikwallace »

g36 wrote:QR_BBPOST On my 405 I thought about the same thing. I wanted to have red light and white light options. I found these bi color leds that plug into the existing fixture and no wiring involved. So I now have my 2 colors by simply toggling the existing switch...https://www.apexlighting.com/accessorie ... lUQAvD_Bwe

Or here with other color options.....https://www.superbrightleds.com/g4-led- ... 130-lumens
Thanks! Didn’t know there was such a light that would switch like that. Solves my problem. And I can easily add a couple more lights.
1959 Larson 16’
1979 Caravelle 18’
1998 Chaparral 2330 7.4 L Mercruiser
2003 Chaparral 260 Ssi 8.1 L VolvoPenta DuoProp
1998 Carver 405 AC 7.4 Horizons
:captain2:
:usa:
User avatar
bud37
Admiral
Admiral
Posts: 5182
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 604 times
Been thanked: 1312 times

Re: Add Circuit for Aft Deck Lights

Post by bud37 »

I used to have salon lights that could be switched to red , really helped with night vision as the boat had a lower helm.
FWIW.....The above is just my opinion.
User avatar
g36
Admiral
Admiral
Posts: 2115
Joined: April 7th, 2014, 6:07 pm
Vessel Info: 1997 Carver 405
Location: Soddy Daisy TN.
Has thanked: 7 times
Been thanked: 654 times

Re: Add Circuit for Aft Deck Lights

Post by g36 »

bud37 wrote:QR_BBPOST I used to have salon lights that could be switched to red , really helped with night vision as the boat had a lower helm.
That's why these are really cool. Theres nothing to do but add this led bulb and you can have white and red choices (or blue)by toggling the existing switch without doing anything to the fixture or the switch. Inside my 405 there is a white ceiling single light over the stbd side galley that I replaced with this (can still have white when needed or red )along with the sundeck lights. So at night I can go red inside and out if I want for nite vision.. Easy peasy.
1997 Carver 405
Crusader xli
The Black Pearl
Soddy Daisy Tn.
Post Reply