Replacement throttle/gear shifter

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
Post Reply
User avatar
Kiwi
Scurvy Dog
Scurvy Dog
Posts: 3
Joined: February 18th, 2025, 1:23 pm
Vessel Info: 3227 carver convertible 1988
Location: New Zealand
Has thanked: 3 times

Replacement throttle/gear shifter

Post by Kiwi »

Hi guys. Needing some help please. We had a mishap with our vessel, resulting in the lower helm gear shifter snapping (cable got caught underneath and pulled through) we have the replacement cable but I can't find a replacement shifter. We brought one here in New Zealand but it's nothing like the Carver ones and won't work. I can't seem to find anything online. Is there anywhere I can buy parts like this please? It's a 1988 carver convertible 3227
User avatar
Merkinbrumsky
Deck Hand
Deck Hand
Posts: 92
Joined: July 29th, 2021, 11:33 pm
Vessel Info: 1985 Carver Voyager
Location: Georgian Bay
Has thanked: 53 times
Been thanked: 38 times

Re: Replacement throttle/gear shifter

Post by Merkinbrumsky »

I’m guessing your controls were likely made by a company called “Morse” I would try an eBay search or a company which is also on eBay called Great Lakes skipper. Shipping might be prohibitive for you but that’s where I would start. I replaced one of the throttle levers on my 85 after a Marina mechanic broke one off. I see the brand has been picked up by teleflex so maybe try them as well. Luckily I was able to source it locally at a boat junkyard. Hope this helps. Good luck.
User avatar
km1125
Admiral
Admiral
Posts: 3658
Joined: February 28th, 2017, 6:04 pm
Has thanked: 81 times
Been thanked: 1114 times

Re: Replacement throttle/gear shifter

Post by km1125 »

You should post some pics of what you're looking for. Lots of other models of Carvers (and probably other manufacturers) likely used the same shifter, but no one will know exactly what you're talking about unless they're familiar with your model.
User avatar
Kiwi
Scurvy Dog
Scurvy Dog
Posts: 3
Joined: February 18th, 2025, 1:23 pm
Vessel Info: 3227 carver convertible 1988
Location: New Zealand
Has thanked: 3 times

Re: Replacement throttle/gear shifter

Post by Kiwi »

Thanks for the advise! Here's a couple of pics. Will check out those suppliers too.ta
You do not have the required permissions to view the files attached to this post.
User avatar
bud37
Admiral
Admiral
Posts: 5182
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 604 times
Been thanked: 1312 times

Re: Replacement throttle/gear shifter

Post by bud37 »

Welcome to the forum....
Would you have a close up pic of where it is broken....perhaps there could just be a repair ??
FWIW.....The above is just my opinion.
User avatar
Kiwi
Scurvy Dog
Scurvy Dog
Posts: 3
Joined: February 18th, 2025, 1:23 pm
Vessel Info: 3227 carver convertible 1988
Location: New Zealand
Has thanked: 3 times

Re: Replacement throttle/gear shifter

Post by Kiwi »

[image][/image] one side only has damage where the bolt tore through. The other side snapped off one piece and cracked the other piece. Hope to replace but if we can't find anything we will be resigned to trying to fix it
You do not have the required permissions to view the files attached to this post.
Post Reply