Volvo Penta TAMD 74P EDC Long Delay in Engaging

DIESEL engine, transmission and generator repair and maintenance discussion forum.
User avatar
Tennessee River Rat
Scurvy Dog
Scurvy Dog
Posts: 27
Joined: July 11th, 2016, 1:43 pm
Vessel Info: 2001 Carver 506 Aft Cabin 480 Volvo's
2007 Meridian 341 with 6.2 MPI Horizon Mercruiser Engines
1988 Sea Ray 340 with Twin 454's
1987 Stratos with 200 HP Merc
Location: Joe Wheeler Marina-Rogersville, AL
Has thanked: 3 times
Been thanked: 6 times

Re: Volvo Penta TAMD 74P EDC Long Delay in Engaging

Post by Tennessee River Rat »

That 2 second delay is bothersome at times. When we did our sea trial we had the lead mechanic from Plano Marine there on Lake Texoma, which is a large Volvo Marina. The fellow sat beside me during the entire sea trial and answered all my questions, quite a learning experience. I asked if there was any way he could adjust the 2 second delay out completely. He said no there was not. That Volvo had determined that this was the safest way to protect engines/transmissions. So the 1.5 seconds is it!
User avatar
Lyndon670
Admiral
Admiral
Posts: 657
Joined: July 29th, 2013, 11:35 pm
Vessel Info: 2000 Carver 506
Volvo TAMD74EDC
Location: Georgian Bay
Has thanked: 124 times
Been thanked: 140 times

Re: Volvo Penta TAMD 74P EDC Long Delay in Engaging

Post by Lyndon670 »

Yes, and you will get used to it. I went from conventional controls on my Silverton 42C to the EDC controls. I was baffled to say the least and almost at panic levels the first time(s) I came into dock. But then you realize that it isn't so bad and that you use the mass of the boat more. The wind doesn't have as much effect because of the mass so things aren't as urgent as they seem - with proper planning.
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
Post Reply