Re: New Member and longtime Carver owner
Posted: January 25th, 2021, 9:44 pm
Welcome
Hi Ron,
I also have a 466 MY (2004) and after doing tons or research, have found this to be the only affordable solution that does the Job. This unit will keep the Dinghy completely off the platform and drop's into the water freeing up additional space after the Dinghy is launch. I just literally ordered this, so can't tell you from experience, but I think this fits the bill. https://www.dinghydavits.com/shop/4ncx2 ... c8yakcdtci BTW the bottom of the lift is exactly 36 inches and I spoke to Carver who told me their are two heavy Alum plates exactly 36 inches off center from the platform edge 15 inches back. They are made for this type of application and you can drill and thread into them. They are 7 1/2 inches wide. Hope this helps.. Good luck