Carver Owners Forum

Those are the same as I have. Once you check out photo 2, same situation, Marked POS POS in, and NEG NEG out. Don’t quite understand that. However, I am running 4 panels,, 2 each hooked in series, then joining the 2 in series in a parallel manner, so these will work, just confusing as all Hell!

Also, here is the installation better than 1/2 done. I am surprised, but those panels are SOLID! Full cure in another 12 hours, but they do not budge! I have a cubby on my 390 behind the couch where the central vac is, I am going to tuck the MPPT charge controller in there. I am also going to place a disconnect switch before and after the controller. Over kill for 2?

Marked POS POS in, and NEG NEG

That stands for "piece of $hit" and "no effen good". Got to buy some of the good stuff.

You made me laugh !

Your panels mounted with 4200 are going no where. My friend had to move 4 elevator bolts this week end to install a new panel. He had a hard time getting the mounts off to move them. Mine are mounted the same way and I have had no issues.

The install looks great.

Greg

Thank you, I hope to finish up this weekend, final photos to come.

Thanks for keeping the updates and pics coming

Great job Tony, can't wait to get some real life operating numbers from you.

Put it on line today. Very impressed. I shut shore power, and ran from batteries. ALL day, fridge was working, toilet and water pressure pump, inverter for coffee. Batteries stayed at 100%. Controller, went up, down, and kept up with the load. Next weekend a weekend away on the hook.

You da man......nice...have fun with your new boat...and thanks for posting your progress as this will help others down the road I am sure.....