Carver Owners Forum

Really looks like the source for head. The choice of raw water or fresh water was made at the factory. If the head is electric, they normally used freshwater as recommended by Raritan. Just close the valve and flush a couple of times. If the water stops flowing to the bowl, you have confirmation. If you are not in the water, still do the same thing if there is water in your tank. If no water in tank, put a small amount in and test. er

C0ps wrote:

tomschauer wrote:QR_BBPOST That looks like it is an inlet for either your a/c or your head. Follow the line and see where it goes.

Ok, so must be for the head because I dont have AC. I thought the water from the toilet came from the fresh water tank.

Sometimes yes, sometimes no. Looks like water line to the head to me.

Thanks all, yes it ended up being the water to the head.