Re: Vacuflush
Posted: April 30th, 2024, 5:06 pm
Lookin good, no poo poo issues for several summers now. 
Carver Owners Forum
Discuss Carver Boats and Yachts at the best Carver Owners Forum on the net!
https://www.carveryachtowners.com/
Vacuflush
Page 2 of 2
Re: Vacuflush
Posted: April 30th, 2024, 7:22 pm
Hopefully so! The bills are in the proper direction, couldn't get them all perfectly horizontal , some about 10 degrees off, logically that should not matter, right?
Re: Vacuflush
Posted: May 1st, 2024, 12:24 am
Orientation shouldn't matter. I've read where some people even align them 90degrees off from each other. Not sure it really has any impact though. 
Re: Vacuflush
Posted: May 1st, 2024, 4:46 am
It's basically a check valve, it don't give a crap which rotation it is it put in. Pun intended. 
Re: Vacuflush
Posted: May 1st, 2024, 6:06 am
Love the puns in the morning!!!!!!! Makes a smile on my face! I just wanted to check with the wicked knowledge base here. Thanks guys!!!!!!!!
Re: Vacuflush
Posted: May 4th, 2024, 7:56 am
We used your tip for the rear screws and that’s a great call. Also, as you said how it got quieter, very true! Noticeable difference.Alanna Mo Cree wrote:QR_BBPOST I was surprised by how quiet the pump got after changing the bellows. Hopefully this is a once every five years (or more) job.
One tip for putting it back in the boat is to have the mounting screws on the aft side screwed in the boat a little and then slide the pump assembly under them if you can. It's tricky, but I ended up doing that job multiple times. (Long story)