Re: Shaft Alignment
Posted: October 6th, 2023, 4:48 pm
John Pirie, previously at Hindsons. I am familiar with the lapping process, it was mentioned by the surveyor. I didn’t know what it was, so I researched it. Now you’re getting into a real fine tuning. Lol.
If repairs to the struts are required, I would rather get that done by United, than have the mechanic shim the mount too much.
I will ask United about the lapping. The props that are going on the boat are the ones that were repaired, not the ones that are on the boat now.
Greg
If repairs to the struts are required, I would rather get that done by United, than have the mechanic shim the mount too much.
I will ask United about the lapping. The props that are going on the boat are the ones that were repaired, not the ones that are on the boat now.
Greg