Carver Owners Forum

recent purchase, trying to do my maintenance a little at a time.

where are the fuel filters on my 99 carver mariner 350 with crusader engines?
I see the aquacool cylinder and have looked the length of the fuel lines for fuel filter canisters or pancakes

am I blind? lol

Lakegirl

is this a throttle body injection? i dont have your boat but my 97 405 with 454's is throttle body i have a metal can at the throttle body a water seperator on the stbd side of each engine and below that oberg "pancake" filters. heres a link to a diagrham that might help. you wouldnt think they would be easy to miss but anything with a boat you never know, good luck
http://www.marineparts.com/mpf/mpf62.aspx

Sierra marine makes a replacement filter for your application.

http://m.go2marine.com/gstore/go2marine ... tId=85439F

This is my next project. My 6.2 engines currently have the Mallory Marine filter.

Check yours also for a metal canister inline filter, close to the fuel tanks. That filter , which is clamped into the fuel line, grabs particulate in the fuel, while the spin on canisters are for water separation. I'm planning to replace both sets very shortly. I believe the inline particle filters are generic to all engines.

Example of an inline fuel filter.