We bought a 1998 405 Aft Cabin and during the Survey the inspector could not confirm the ice maker was operational because of a fresh water pump issue. Knowing this when we bought the boat, I figured since the aluminum plate below the ice tray was cold that at least the compressor was functional. After bringing the boat back to our home dock, a three day journey, I determined the causal factor was an inoperative cooling fan motor. I removed the fan motor and tested it and sure enough it was not ...

Recently purchased a 1985 Carver 3697 Mariner, and looking for an owners manual...
Any assistance would be appreciated.
Thanks

One of my boating friends told me about a dry bilge pump system he purchased like this.

https://www.amazon.ca/Seaflo-SEAFLO-Dry ... 1414&psc=1

After reading the reviews, there were simply too many failures so I sehttps://www.amazon.ca/Seaflo-SEAFLO-Dry-Bilge-System/dp/B07V4G41K4/ref=asc_df_B07V4G41K4/?tag=googleshopc0c-20&linkCode=df0&hvadid=578819718393&hvpos=&hvnetw=g&hvrand=8773907024953505773&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9000604&hvtargid=pla-813999341414&psc=1 ...

Hello all, I have a 2008 59’ Marquis. The stern thruster has stopped working. It is a Volvo Penta SP1300, 24 volts. Two motor shops have told me the motor is too far gone and can’t be rewound. I would like to replace the motor instead of changing over to another brand of stern thruster. Anyone, with any suggestions, would be greatly appreciated. The part number for the motor is 41100656, but, it is no longer available.

Everything off..all breakers on shore power #2 side, even the battery switches..

Many times as soon as I plud in the 30 amp cord it pops the dock breaker... Yes I tried known good 30 amp cords and changed to other dock power plugs from boats having no issue..



Generator works fine and powers the entire vessel no problem..



When I shut down the Generator and plug shore power #2 into the dock it pops it with everything off... Shore power # 1 is fine. no issues.



HELP!! Called 2 marinas, they have no b ...

Hey All,

I am looking for 2000 or later 530 or 570 voyager. Looking for a freshwater yacht preferably. If anyone is looking to sell please message me.

Neil

BOAT FIRE NEED VOLVO PENTA WIRING HARNESS 3863229. CAN ANYONE HELP. HOW CAN I GET ONE MADE?

So I was on Cummins Quickserve portal tonight downloading the manual for my Onan generator. As I was looking closer at the nameplate data (see pic) I realized it says it is a 3000rpm / 50Hz. The 50Hz is kinda throwing me for a loop. If you look close, to the right of the "Model No" it looks like a sticker has been applied with "10.0MDKWB" on it. It kinda looks like it is peeling up a bit at the end so I don't know what that's all about either.

I used the actual Serial Number from the namepla ...

Hello, We lost the strike plate for an aft cockpit door. Does anyone know where I can find one? Thanks, Frank

So my masthead light plastic lens is starting to yellow some and I tried finding a replacement. Could not find one however I was shocked at the price of a new masthead light assembly by Perko which is the one I have.

https://marinepartssource.com/led-masth ... 0170bm012l

Found one very similar and actually has the same mounting hole pattern dimensions so installation is very easy. The Five Oceans unit is about 1/8" wider and 1/2" taller but otherwise looks pretty much the same. ...