This is one of the 3 main bilge pumps. It trips the breaker. I have no idea what brand model it is? Any ideas? Thanks

I have a 1995 carver mariner crusader motors with v drive i have a vibration in the starb. motor there is some slop in the prop shaft no tranny fluid loss .Can this be replaced with out pulling motor ? I can not find anyone in our area after over a week to look at it .

My kitchen sink, bathroom sink, and shower would not turn on. I found my fresh water pump, which is a Jabsco 31620-0092, was about a quarter the way under water down in my hull. The red wire from the back of the motor runs to the front of the pump (which google told me is a pressure switch). That motor red wire is connected to the pressure switch, but the other red cable coming off of it, which should go to the power supply hot wire, was disconnected. Where those connections are on the pressure ...

Finally after a long wait I did get into the water. My boat launched for the season on June 29th. That is the latest I have ever hit the water. The wait was for the company I hired to do my hullsides buff and wax. While it was worth what they charged me I question if it was worth the wait. It does look great so I guess it was worth it.

The launch went well. Both engines fired right up after their almost 8 month nap. Since I had to work that Friday I only took a short shakedown cruise. The followi ...

I have a 89 Mariner 28’ my generator quits when put under load. Any ideas on repairing or just buy new generator?

I have a Carver 2001 506 with 6cta engines. Have installed new electronics. Axiom pro is the flat screen unit that I would like to display engine readings and fuel consumption imformation. Has anyone retrofitted there analog readouts to digital. I need some direction on the type of sensors and how to interface them with the raymarine axiom pro.

Just wondering if anyone has an tips or specific things I should look for when buying a used mariner 350. Any help would be appreciated. Looking forward to being part of this community!

Here are some photos of some fun we had the week of July 4th on the Mississippi and St. Croix rivers in Minnesota and Wisconsin. The river has been very high all year from the rain and the St. Croix river was a no wake zone, traveling 23 miles at no wake speed is painful! But fun! A lot of anchoring out for days at a time, and visiting a very nice marina in Bayport Minnesota. We really enjoyed being on the boat for 10 days, and meeting up with such great friends.

Hey All...

So I have a factory installed Kohler generator on my 2001 350 Mariner... But I am new to the boat.

So I'm new to having a generator. I start it up and she runs well, except I get very small amount of water out of the exhaust. Because i'm super paranoid, I have not run it for very long, maybe 3-5 mins MAX.

Here is what I know, but don't know if any of it matters:
- I have a closed loop cooling system
- Have completely cleaned sea strainer
- gen starts and seems to run just fine but hav ...

Do you have pix of the bench seat to the right of the captain's chair? We are trying to reinstall seat after removal of previous owner's computer cabinet. We are unsure of stock configuration - how metal frame attaches, how cushions are fastened, etc. Any pix and/or advice would be appreciated.