89 Carver 3607 Portlight Replacement (all)

Are you a new member? Stop in and say hi!
Post Reply
User avatar
PaulB
Scurvy Dog
Scurvy Dog
Posts: 1
Joined: January 27th, 2017, 5:12 pm
Vessel Info: 1989 Carver 3607 Aft Cabin Motor Yacht with Mercruiser Blue Water 7.4 Liter engines.
Location: Minnesota

89 Carver 3607 Portlight Replacement (all)

Post by PaulB »

My wife and I are Carver fanatics, this being our second one and we love her. One of our projects for next summer is replacement of the 10 original port lights, several of which are leaking badly. My questions is this: Is there anyone out there that has done this and kept the hull cutout size for the port lights? This would sure prove useful. I'm ordering the port lights from Bomar Pompanette and believe they may have manufactured the original ones used by Carver.
User avatar
Ramsport47
Commander
Commander
Posts: 376
Joined: February 10th, 2013, 7:13 am
Vessel Info: 1998 Carver 310 Santego
Has thanked: 72 times
Been thanked: 59 times

Re: 89 Carver 3607 Portlight Replacement (all)

Post by Ramsport47 »

The originals were made by Bomar...they are the Grey (Gray) series of portlights. You will need the dimensions of the existing ones to order replacements, and they should fit exactly, so no cutting should be necessary. Also, if the frames are okay, and just the lenses (windows) are cracked or broken, you can get just that portion of them in either clear or smoke tint.
Kenny
1998 Carver 310 Santego
T-Merc 350 Mag MPI (300hp)
Port: Cedar Point Marina, Sandusky, Ohio
User avatar
Lyndon670
Admiral
Admiral
Posts: 657
Joined: July 29th, 2013, 11:35 pm
Vessel Info: 2000 Carver 506
Volvo TAMD74EDC
Location: Georgian Bay
Has thanked: 124 times
Been thanked: 140 times

Re: 89 Carver 3607 Portlight Replacement (all)

Post by Lyndon670 »

Why not just replace the gasket? If they are not cracked, I can't see changing them. I replaced the gaskets on my Silverton 42C for exactly the same reasons you are.
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
User avatar
mjk1040
Admiral
Admiral
Posts: 1531
Joined: July 30th, 2015, 8:15 am
Vessel Info: 1998 355 AC/MY "Deja Vu"
Location: Savannah, NY
Has thanked: 9 times
Been thanked: 248 times

Re: 89 Carver 3607 Portlight Replacement (all)

Post by mjk1040 »

Paul; our neighbor replaced all of his port widows in his '86 aft cabin and if I remember right he had to re-drill the mounting screw holes. The new ones were the same size however. If u can, I'd go with Lyndon's suggestion and replace the gaskets. Mike
Mike :down:
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow
User avatar
MakinTime
First Mate
First Mate
Posts: 154
Joined: January 1st, 2017, 10:53 am
Vessel Info: Carver 3607 MakinTIme
Glastron MX175 MakinTimeToo
Has thanked: 52 times
Been thanked: 31 times

Re: 89 Carver 3607 Portlight Replacement (all)

Post by MakinTime »

Where do you purchase these windows?
User avatar
mjk1040
Admiral
Admiral
Posts: 1531
Joined: July 30th, 2015, 8:15 am
Vessel Info: 1998 355 AC/MY "Deja Vu"
Location: Savannah, NY
Has thanked: 9 times
Been thanked: 248 times

Re: 89 Carver 3607 Portlight Replacement (all)

Post by mjk1040 »

Goggle it, there must be multiple suppliers, Bomar is the brand name I do believe. Mike
Mike :down:
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow
User avatar
Thepearl87
Scurvy Dog
Scurvy Dog
Posts: 9
Joined: July 25th, 2021, 1:06 pm
Vessel Info: 1987,Carver 3607
Location: Clayton, NY
Has thanked: 3 times

Re: 89 Carver 3607 Portlight Replacement (all)

Post by Thepearl87 »

Can anyone tell me where I can get the plastic lenses only for the Gray series (1987 Carver 3607) I found a size chart on line once, but can't locate it again.
User avatar
km1125
Admiral
Admiral
Posts: 3658
Joined: February 28th, 2017, 6:04 pm
Has thanked: 81 times
Been thanked: 1114 times

Re: 89 Carver 3607 Portlight Replacement (all)

Post by km1125 »

Thepearl87 wrote:QR_BBPOST Can anyone tell me where I can get the plastic lenses only for the Gray series (1987 Carver 3607) I found a size chart on line once, but can't locate it again.
Pompanette used to have them. If you get the actual part number, do some searches on the Internet. There are other retailers that will sell them less than list price. If you buy direct from Pompanette you'll pay list. Same lense and comes from same place, just the discount from list price.
Post Reply