Anchoring
- vorpefactorx
- Scurvy Dog

- Posts: 5
- Joined: May 24th, 2016, 8:27 am
- Vessel Info: 2001 carver 410 sport with volvo TAMD 63 engines
- Location: St Augustine Fl.
- Been thanked: 1 time
Anchoring
I have a question for the group. I own a 2002 carver 42' sportsman. She is the same boat as a later model 420 Mariner with the large rear arch and I had owned one of them for a few years. Both boats have a weird tendency to swing when anchored. I can't tell if it's the tide , wind or a combination. I have tried long scope , short scope , and tied off at the bow cleat , nothing seams to stop it. I have 5/8" nylon anchor line and 30' of chain and generally anchor in inshore areas along Florida's East coast so problem with holding , but the swinging is annoying at best. Help or suggestions , please.
- tomschauer
- Admiral

- Posts: 2323
- Joined: March 28th, 2016, 10:52 pm
- Vessel Info: 1998 Carver 355
Suspicious Fishes !
2022 Kawasaki 310X - Location: upper chesapeake bay
- Has thanked: 326 times
- Been thanked: 602 times
- mjk1040
- Admiral

- Posts: 1531
- Joined: July 30th, 2015, 8:15 am
- Vessel Info: 1998 355 AC/MY "Deja Vu"
- Location: Savannah, NY
- Has thanked: 9 times
- Been thanked: 248 times
Re: Anchoring
Have to agree with Tom on this one, no other choice other than beaching her!
Mike
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow
- tomschauer
- Admiral

- Posts: 2323
- Joined: March 28th, 2016, 10:52 pm
- Vessel Info: 1998 Carver 355
Suspicious Fishes !
2022 Kawasaki 310X - Location: upper chesapeake bay
- Has thanked: 326 times
- Been thanked: 602 times
- hargsnz
- Scurvy Dog

- Posts: 31
- Joined: August 17th, 2014, 1:50 am
- Vessel Info: 366, 2003, twin Cummins 280HP, Kohler 8.0,
- Has thanked: 4 times
- Been thanked: 4 times
Re: Anchoring
You can try a double snubbing 'bridle' system using 2 ropes from the 2 forward cleats. There's a system made in USA by Mantus. You can goolge & take a look. This will not solve it, swinging at anchor is normal for power boats without keels, but it will help.
- Lyndon670
- Admiral

- Posts: 657
- Joined: July 29th, 2013, 11:35 pm
- Vessel Info: 2000 Carver 506
Volvo TAMD74EDC - Location: Georgian Bay
- Has thanked: 124 times
- Been thanked: 140 times
Re: Anchoring
Setting a 2nd anchor off the bow in a "V" formation will stop a swing.
+1 on the stern anchor as well, but ONLY use a stern anchor in an anchorage with other boats if everyone else does.
+1 on the stern anchor as well, but ONLY use a stern anchor in an anchorage with other boats if everyone else does.
Lyndon,
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario
2000 Carver 506
FOXY JOE
Volvo 7.4TAMD
Queens Cove Marina
Georgian Bay, Ontario

