Purchase Advice on a 2003 Carver 444 ES
- aldera
- Scurvy Dog

- Posts: 12
- Joined: May 21st, 2017, 6:27 pm
- Vessel Info: 1995 Carver 325 Aft Cabin
- Location: Michigan
- Has thanked: 15 times
- Been thanked: 3 times
Purchase Advice on a 2003 Carver 444 ES
Hello,
I'm looking real hard at purchasing a 2003 Carver 444 ES layout with twin Volvo TAMD63Ps (500 hrs). New to boating other than 3 years with a 20 foot pontoon. I know, a real newbie!! It will be docked a lot or anchored close to shore. I will primarily be boating on Lake Michigan (Grand Haven) with occasional trips of maybe 50-200 miles. I've been reading the heck out of every forum and website I can. I've also downloaded and read the manuals for the Carver and the Volvo TAMD63Ps. I know you can only read so much and some of it you have to take with a grain of salt. I've also reviewed the maintenance records for the past few years.
For this particular boat, I read that there was some sort of recall on the exhaust system but couldn't find anything on the USCG website to verify it. I sent an email to Carver this evening with the HIN to get a response from them. Are there any other issues I should be aware of with this particular boat? I will of course be doing a marine survey, engine survey and sea trial. Is there anything i should be looking for or telling the surveyor to be on the lookout for? I will be hiring a qualified sea captain for a day to help me get up to speed on the basics.
Thanks in advance for any advice you might be willing to share!!
I'm looking real hard at purchasing a 2003 Carver 444 ES layout with twin Volvo TAMD63Ps (500 hrs). New to boating other than 3 years with a 20 foot pontoon. I know, a real newbie!! It will be docked a lot or anchored close to shore. I will primarily be boating on Lake Michigan (Grand Haven) with occasional trips of maybe 50-200 miles. I've been reading the heck out of every forum and website I can. I've also downloaded and read the manuals for the Carver and the Volvo TAMD63Ps. I know you can only read so much and some of it you have to take with a grain of salt. I've also reviewed the maintenance records for the past few years.
For this particular boat, I read that there was some sort of recall on the exhaust system but couldn't find anything on the USCG website to verify it. I sent an email to Carver this evening with the HIN to get a response from them. Are there any other issues I should be aware of with this particular boat? I will of course be doing a marine survey, engine survey and sea trial. Is there anything i should be looking for or telling the surveyor to be on the lookout for? I will be hiring a qualified sea captain for a day to help me get up to speed on the basics.
Thanks in advance for any advice you might be willing to share!!
1995 Carver 325 Aft Cabin (Twin 5.7L Crusaders - 260HP)
- RGrew176
- Admiral

- Posts: 6652
- Joined: August 17th, 2015, 4:07 am
- Vessel Info: 2023 SunTracker Party Barge 22 DLX
- Location: Southgate, MI.
- Has thanked: 72 times
- Been thanked: 470 times
Re: Purchase Advice on a 2003 Carver 444 ES
Should you decide to go ahead with the purchase obviously as you have already mentioned the survey both engine and hull along with the sea trial will tell you quite a bit about the boat.
Obviously a good looking over by you first followed by the survey and sea trial will give you a great idea whether to go ahead or continue looking.
If there is nothing listed USCG website concerning recalls it is possible that the particular model and year you are looking at may not have had a recall.
Good luck, hope it works out for you. That would be a great boat to explore our beautiful Great Lakes.
Obviously a good looking over by you first followed by the survey and sea trial will give you a great idea whether to go ahead or continue looking.
If there is nothing listed USCG website concerning recalls it is possible that the particular model and year you are looking at may not have had a recall.
Good luck, hope it works out for you. That would be a great boat to explore our beautiful Great Lakes.
Rick Grew
2025 Godfrey Xperience 2286 SFLX
2004 Past Commodore
West River Yacht & Cruising Club
2025 Godfrey Xperience 2286 SFLX
2004 Past Commodore
West River Yacht & Cruising Club
- Huckleberry
- Scurvy Dog

- Posts: 32
- Joined: September 23rd, 2017, 2:18 am
- Vessel Info: 2007 Carver 36ss .
2005 Carver 44 CPMY - Location: Az
- Has thanked: 18 times
- Been thanked: 6 times
Re: Purchase Advice on a 2003 Carver 444 ES
Don't know if you found it but there is a recall on this on 444 s from 2001 -2003 . Recall # 070042T .
Huck
- DanM
- Deck Hand

- Posts: 96
- Joined: February 8th, 2013, 5:49 pm
- Vessel Info: Carver 396
- Location: Lake Michigan
- Has thanked: 7 times
- Been thanked: 35 times
Re: Purchase Advice on a 2003 Carver 444 ES
Here is the safety notification: http://www.uscgboating.org/content/reca ... ton=Submit
I have a 2004 396 and I also boat on Lake Michigan out of Racine WI so if I can answer any questions PM me and I will be happy to assist.
Dan
I have a 2004 396 and I also boat on Lake Michigan out of Racine WI so if I can answer any questions PM me and I will be happy to assist.
Dan
Dan
Carver 396
SugarSand Tango
Carver 396
SugarSand Tango
- bud37
- Admiral

- Posts: 5182
- Joined: April 23rd, 2015, 10:22 pm
- Has thanked: 604 times
- Been thanked: 1312 times
Re: Purchase Advice on a 2003 Carver 444 ES
DanM wrote:Qr Bbpost Here is the safety notification: http://www.uscgboating.org/content/reca ... ton=Submit
I have a 2004 396 and I also boat on Lake Michigan out of Racine WI so if I can answer any questions PM me and I will be happy to assist.
Dan
Good info thanks Dan...
FWIW.....The above is just my opinion.
- JCD II
- Scurvy Dog

- Posts: 1
- Joined: March 31st, 2018, 7:51 pm
- Vessel Info: carver 444 2003
- Location: Kemah
- Been thanked: 1 time
Re: Purchase Advice on a 2003 Carver 444 ES
I purchased a 2003 , 444 in December. The survey showed some exhaust leaks and is currently out of the water being repaired. No one has said anything about a recall and I came across the issue googling carver 444 this weekend. Is Carver giving any concessions on parts and repair ?
JCD II
JCD II
-
Viper
- CYO Supporter

- Posts: 6266
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 475 times
- Been thanked: 1791 times
Re: Purchase Advice on a 2003 Carver 444 ES
Welcome aboard. Pretty sure that campaign ended years ago but it doesn't hurt to contact Carver...you never know. I think the manufacturer was Centek, you might want to try and contact them too.
- chrisda
- Scurvy Dog

- Posts: 2
- Joined: April 21st, 2018, 10:57 am
- Vessel Info: Carver 444 2003
- Location: Holland Michigan
- Has thanked: 2 times
- Been thanked: 2 times
Re: Purchase Advice on a 2003 Carver 444 ES
I am new to Carver. Just purchased a 2003 444ES with Volvo diesels and 470 hours. I am located in Holland Michigan at Anchorage Marina. I would appreciate other's experience and knowledge. I am looking forward to networking with other owners.
-
Viper
- CYO Supporter

- Posts: 6266
- Joined: July 10th, 2015, 9:58 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: Ontario, Canada
- Has thanked: 475 times
- Been thanked: 1791 times
Re: Purchase Advice on a 2003 Carver 444 ES
Congrats on your new acquisition and welcome aboard. We've got a really good bunch here, always willing help out so ask away. If there's an answer, you'll get one here.
What model Volvo are they?
Have they started launching down your way yet?
What model Volvo are they?
Have they started launching down your way yet?