The EVC system display is showing a Red Triangle and a !
I found this web site... http://www.iboats.com/Alarm-instrument/ ... _id.345197
and This link explains which alarm is sounding.
7 alarms:
1) Oil pressure
2) Water in fuel filter 1)
3) Battery
4) Coolant temperature
5) Coolant level 1)
6) Oil level 1)
7) Fault/serious fault
So the warning I am dealing with #6
Oil Level Sensors
and it appears to be on both engines.
has anyone experienced this?
A Red Triangle ! on my EVC system display
-
harlacarver
- Scurvy Dog
- Posts: 1
- Joined: July 27th, 2016, 8:02 pm
- Vessel Info: 2006 38' Carver Super Sport IPS Pod Drives
- Location: Florida
- Contact:
-
mjk1040
- Admiral
- Posts: 1531
- Joined: July 30th, 2015, 8:15 am
- Vessel Info: 1998 355 AC/MY "Deja Vu"
- Location: Savannah, NY
- Has thanked: 9 times
- Been thanked: 248 times
Re: A Red Triangle ! on my EVC system display
It seems strange both engine sensors would go bad at the same time. Harness connection issue?
Mike 
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow
-
tomschauer
- Admiral
- Posts: 2323
- Joined: March 28th, 2016, 10:52 pm
- Vessel Info: 1998 Carver 355
Suspicious Fishes !
2022 Kawasaki 310X - Location: upper chesapeake bay
- Has thanked: 326 times
- Been thanked: 602 times
Re: A Red Triangle ! on my EVC system display
I would assume you have oil in the engines? Otherwise, maybe when the oil is drained for an oil change it needs a reset?
Just an idea.
Just an idea.
-
jspin101
- Scurvy Dog
- Posts: 39
- Joined: December 4th, 2017, 6:05 pm
- Vessel Info: 2005 Carver 41 CMY w/ 2006 Volvo D6 370I-B's
- Location: Boston, MA
- Has thanked: 8 times
- Been thanked: 2 times
Re: A Red Triangle ! on my EVC system display
Hi All,
Any update on this thread?
I know it's an older thread but figured I'd ask
I'm receiving an orange warning triangle on my display.
I have the 2 round "Idiot Light" displays and the "basic" EVC panel. There is no display.
When I follow the instructions to have the EVC panel blink out an error code nothing happens.
So,
Question #1
What/how would I find out what is going on?
Question#2
What would I get for an EVC display so I can visually see what is going on?
Thanks,
Any update on this thread?
I know it's an older thread but figured I'd ask
I'm receiving an orange warning triangle on my display.
I have the 2 round "Idiot Light" displays and the "basic" EVC panel. There is no display.
When I follow the instructions to have the EVC panel blink out an error code nothing happens.
So,
Question #1
What/how would I find out what is going on?
Question#2
What would I get for an EVC display so I can visually see what is going on?
Thanks,
Sponsors