How to remove the screen on my 1988 27 carver santego 2767

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
Post Reply
User avatar
Nick
Scurvy Dog
Scurvy Dog
Posts: 2
Joined: February 25th, 2018, 4:07 pm
Vessel Info: 1988 Carver Santego 2767
Location: Mass USA

How to remove the screen on my 1988 27 carver santego 2767

Post by Nick »

I have a 1988 Carver Santego 2767 and the screen on the sliding door needs to be replaced. How do I remove the sliding screen to replace the screen.
User avatar
bud37
Admiral
Admiral
Posts: 5184
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 604 times
Been thanked: 1312 times

Re: How to remove the screen on my 1988 27 carver santego 2767

Post by bud37 »

Welcome to the forum........There is usually a couple screws along the bottom frame that you loosen then lift the door up and pull out....the little wheels will retract allowing you to get the door off, although you may have to look under and pry them up a bit with a scraper or kitchen knife.Hopefully yours is like this.
FWIW.....The above is just my opinion.
Post Reply