King starboard anti skid
-
MakinTime
- First Mate
- Posts: 154
- Joined: January 1st, 2017, 10:53 am
- Vessel Info: Carver 3607 MakinTIme
Glastron MX175 MakinTimeToo - Has thanked: 52 times
- Been thanked: 31 times
King starboard anti skid
Hey guys, anyone have any experience with King starboard anti skid for steps? I’m replacing my aft teak steps with king starboard anti skid. Wondering on thickness, thinking 1/2” or 3/4” ... is this stuff pretty stiff? I’m thinking on going 5” wide as opposed to the 2.5” wide that the current ones are. The step width is 22”. At boat outfitters you can buy the stuff pre cut and have a routed edge put on, kinda cool. Thanks.
-
tomschauer
- Admiral
- Posts: 2323
- Joined: March 28th, 2016, 10:52 pm
- Vessel Info: 1998 Carver 355
Suspicious Fishes !
2022 Kawasaki 310X - Location: upper chesapeake bay
- Has thanked: 326 times
- Been thanked: 602 times
Re: King starboard anti skid
I would try to get some info from the manufacturer. I believe with a 22" wide step, even if you use 3/4" you will need support underneath or it will sag rather quickly. The stuff is stiff, but has little structural integrity.
Sponsors