OK, my new to me 356 has one head not working. Worked during survey and at least once/twice after.
Now it's not doing anything.
Suggestions guys? Could this be electrical or more of a clog situation.
This is our first boat with Vacu Flush, so I'm a complete newbie on this one. No stranger to heads as I've done rebuild kits on several heads in the past, both manual and electric.
Vacu Flush not working
-
g36
- Admiral
- Posts: 2115
- Joined: April 7th, 2014, 6:07 pm
- Vessel Info: 1997 Carver 405
- Location: Soddy Daisy TN.
- Has thanked: 7 times
- Been thanked: 654 times
Re: Vacu Flush not working
Have checked the on off switch mounted by it in the on the side of the counter by the sink?Its probably labelled sleep. If that is on check the breaker panel to make sure you don't have that turned off.
1997 Carver 405
Crusader xli
The Black Pearl
Soddy Daisy Tn.
Crusader xli
The Black Pearl
Soddy Daisy Tn.
-
buster53
- Admiral
- Posts: 1170
- Joined: May 12th, 2017, 10:41 am
- Vessel Info: 2001, Carver 356
- Location: Gwynn’s Island, VA
- Has thanked: 10 times
- Been thanked: 285 times
Re: Vacu Flush not working
When we were on the boat last Friday, it wasn't working. We came back today and it's working just fine. It's a miracle!
-
bud37
- Admiral
- Posts: 5182
- Joined: April 23rd, 2015, 10:22 pm
- Has thanked: 604 times
- Been thanked: 1312 times
Re: Vacu Flush not working
Between the head and the vac pump itself should be a white tank that looks a bit like a boat fender on its side....on the end of that tank is a vac switch under a cover,( you will see the wires), that controls the pump cycles....sometimes those switches stick a bit ...something to keep in mind.....good luck man..... 
FWIW.....The above is just my opinion.
Sponsors