reprop on a 2357 with a 5.7 L motor

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
Post Reply
User avatar
senjen
Scurvy Dog
Scurvy Dog
Posts: 14
Joined: May 6th, 2018, 12:03 pm
Vessel Info: 1990 2357 Montego.
1986 28 Monte Carlo
1986 21' scarab 1
1980 30' Sedan Bridge
Location: lake texoma
Has thanked: 3 times

reprop on a 2357 with a 5.7 L motor

Post by senjen »

I got this boat with a 14 x 16 pitch 4 blade s/s prop. didn't get proper wot rpm. only could get 3800. boat hauled and serviced and marina installed 3 blade 14 x 21 pitch. boat will only get to 2900 and then seems to lose power. if anyone out there has a opinion on if this boat is now over propped or something else going on I would love to hear it. thanks for any help
User avatar
bud37
Admiral
Admiral
Posts: 5184
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 604 times
Been thanked: 1312 times

Re: reprop on a 2357 with a 5.7 L motor

Post by bud37 »

Looks like they went a bit too far.......you seem to be overpropped now for sure, judging by the engine reaction......maybe only to 18....any good prop shop should be able to pin that down for you.
FWIW.....The above is just my opinion.
Post Reply