I'm the John Snow of CYO

RGrew176 · Post by **RGrew176** » January 31st, 2019, 2:21 am

Welcome Aboard.

Johnfrmcal · Post by **Johnfrmcal** » January 31st, 2019, 11:50 am

Viper wrote:QR_BBPOST Welcome aboard John. How long have you owned her?

About 4 years now and still doing upgrades, I guess that's a never ending thing. As long as we live on the water in California, we will keep her. I'm also shopping for the largest trailerable cruise we can get (looking for a 27 footer) so we can tow it all over the US and boat in new in different places when we retire in a few years.

Johnfrmcal · Post by **Johnfrmcal** » January 31st, 2019, 12:03 pm

Viper wrote:QR_BBPOST Welcome aboard John. How long have you owned her?

About 4 years now and still doing upgrades, I guess that's a never-ending thing!

Post by **Viper** » January 31st, 2019, 12:04 pm

What's under the floorboards in the engine bay?

Cooler · Post by **Cooler** » January 31st, 2019, 1:02 pm

John Snow - I know where you can find 2 boats in almost pristine condition, low hours, and in that 27 - 28 ft range. Both are in Northeast WI, and have only seen fresh water. One is a Sea Ray 270 Sundancer (269 hrs), the other is a Cruisers Yachts 2870 Rogue ( 400ish hours ). Both are late 90's early 2000 model years. Beams are 9.5 and 10.0 respectively. Let me know if you want links. Carver hasn't built anything in that size since mid 90's

er

zoomiejim · Post by **zoomiejim** » January 31st, 2019, 7:28 pm

Welcome aboard!

tomschauer · Post by **tomschauer** » January 31st, 2019, 9:33 pm

John, you may already know this, but most states, at least here on the right coast, require a permit to tow anything over 8'6" wide. A lot of go fast boats, center consoles and bow riders in the 27' to 42' range make 8'6" beam boats for this reason. But it makes cabin space feel a bit tight. Some of those newer little tugs do a good job of making the interior feel bigger and still hold the narrow beam and are trailerable. Someone in our marina bought a new one last year. Volvo diesel inboard with bow and stern thrusters. Neat little boat, but was 300k for a 31 x 8'6"

g36 · Post by **g36** » February 1st, 2019, 10:33 am

welcome , had a 78 trojan for many years and loved her as much as i do my carver now. carver tried to do the right thing it was sad to see trojan go away.

Johnfrmcal · Post by **Johnfrmcal** » February 1st, 2019, 10:50 am

Viper wrote:Welcome aboard John. How long have you owned her?

About 4 years now and still doing upgrades, I guess that's a never-ending thing!

Johnfrmcal · Post by **Johnfrmcal** » February 4th, 2019, 11:28 am

Viper wrote:QR_BBPOST What's under the floorboards in the engine bay?

Twin Cummins 450 Diamonds, great engines!

I'm the John Snow of CYO

Re: I'm the John Snow of CYO

Re: I'm the John Snow of CYO

Re: I'm the John Snow of CYO

Re: I'm the John Snow of CYO

Re: I'm the John Snow of CYO

Re: I'm the John Snow of CYO

Re: I'm the John Snow of CYO

Re: I'm the John Snow of CYO

Re: I'm the John Snow of CYO

Re: I'm the John Snow of CYO