Cooktop replacement

darrenlife
First Mate
First Mate
Posts: 123
Joined: September 25th, 2018, 8:36 am
Vessel Info: 2002 Carver 410 Sport Sedan
Location: Peterborough, Ontario, Canada
Has thanked: 69 times
Been thanked: 36 times

Cooktop replacement

Post by darrenlife »

My original Princess Ceran 3-burner cooktop has one defective burner and would like replace it with an induction cooktop. The existing cutout is 21.75” wide and 19” deep with a 120VAC input.

I’m hopeful that someone else has taken this on as I’m finding a hard time locating a comparable sized induction cooktop that is 120V. I found one un8t by True Induction but it requires two separate 15amp outlets as it has two cords and won’t operate with both cords plugged into the same duplex outlet.

I’m open to dropping in two separate cooktops however these units are typically only 15” deep.

Thanks in advance for your help.
User avatar
Midnightsun
CYO Supporter
CYO Supporter
Posts: 2984
Joined: March 27th, 2016, 2:27 pm
Vessel Info: The Midnight Sun
2007 41CMY
Volvo D6-370's
Location: Montreal, Canada
Has thanked: 272 times
Been thanked: 1193 times

Re: Cooktop replacement

Post by Midnightsun »

the 19" deep is definitely a challenge. You may want to consider an adapter plate for the rear that will take up the 4 missing inches or divide it 2" front and back. This is what I used but again it is 15" deep. https://www.amazon.com/True-Induction-S2F3-Counter-Cooktop/dp/B0087OWY5A/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=inductiontop-20&linkId=b4594591a56036241404c32fdd203f63
Cheers, Hans
2007 Carver 41 CMY
Twin Volvo D6-370's
Montreal, Canada
Midnight Sun I Photos
User avatar
km1125
Admiral
Admiral
Posts: 3657
Joined: February 28th, 2017, 6:04 pm
Has thanked: 81 times
Been thanked: 1114 times

Re: Cooktop replacement

Post by km1125 »

User avatar
bud37
Admiral
Admiral
Posts: 5182
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 604 times
Been thanked: 1312 times

Re: Cooktop replacement

Post by bud37 »

This is the perfect time for that new countertop you have been wanting..... :-D
FWIW.....The above is just my opinion.
darrenlife
First Mate
First Mate
Posts: 123
Joined: September 25th, 2018, 8:36 am
Vessel Info: 2002 Carver 410 Sport Sedan
Location: Peterborough, Ontario, Canada
Has thanked: 69 times
Been thanked: 36 times

Re: Cooktop replacement

Post by darrenlife »

Thanks for the replies.

I’ve decided to go with the True Induction three burner model and run another circuit to the stove. Fortunately not that big a deal, just a few hours labor and beer :beergood:
User avatar
bud37
Admiral
Admiral
Posts: 5182
Joined: April 23rd, 2015, 10:22 pm
Has thanked: 604 times
Been thanked: 1312 times

Re: Cooktop replacement

Post by bud37 »

Sounds like the way.. :down: .....heh what is the total amp draw if you had the entire cook top working ?
FWIW.....The above is just my opinion.
darrenlife
First Mate
First Mate
Posts: 123
Joined: September 25th, 2018, 8:36 am
Vessel Info: 2002 Carver 410 Sport Sedan
Location: Peterborough, Ontario, Canada
Has thanked: 69 times
Been thanked: 36 times

Re: Cooktop replacement

Post by darrenlife »

One side is 1800W (15amps) and the other side is 1500W (12.5 amps)

I’ll post once the install is complete, looking forward to getting rid of the existing unit with the rusted trim.
User avatar
mjk1040
Admiral
Admiral
Posts: 1531
Joined: July 30th, 2015, 8:15 am
Vessel Info: 1998 355 AC/MY "Deja Vu"
Location: Savannah, NY
Has thanked: 9 times
Been thanked: 248 times

Re: Cooktop replacement

Post by mjk1040 »

Have you thought of checking out a RV/camper supplier for a new cook top. They may have just what you need with less modifications.
Mike :down:
I'd Rather Be Boating!
1989 Sea Ray Seville
1986 Carver Mariner 32'
1990's Thompson 22' Cuddy Cabin
1990's 4Winns 245 Vista Cruiser
1980's Thompson 19' Open Bow
darrenlife
First Mate
First Mate
Posts: 123
Joined: September 25th, 2018, 8:36 am
Vessel Info: 2002 Carver 410 Sport Sedan
Location: Peterborough, Ontario, Canada
Has thanked: 69 times
Been thanked: 36 times

Re: Cooktop replacement

Post by darrenlife »

Yes, I had visited a couple however they offered much the same as what I found online. I’m hopeful the one I bought will drop in without having to enlarge the hole, fingers crossed.
User avatar
Midnightsun
CYO Supporter
CYO Supporter
Posts: 2984
Joined: March 27th, 2016, 2:27 pm
Vessel Info: The Midnight Sun
2007 41CMY
Volvo D6-370's
Location: Montreal, Canada
Has thanked: 272 times
Been thanked: 1193 times

Re: Cooktop replacement

Post by Midnightsun »

The hole is rather easy to enlarge if you need to, messy but easy. I have Corian in mine or a least something resembling it. Simply used a battery operated Skilsaw with carbide tipped blade. Worked very well. I put a tarp over myself and the stove, put on a dust mask with my wife accompanying me holding the vacuum hose following me while I cut, contained the mess to a small area and clean up was fairly easy.
Cheers, Hans
2007 Carver 41 CMY
Twin Volvo D6-370's
Montreal, Canada
Midnight Sun I Photos
Post Reply