Removing Sectional in 3807
- Matt1989Carver3807
- Scurvy Dog

- Posts: 30
- Joined: March 19th, 2019, 11:43 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: San Diego
- Has thanked: 13 times
- Been thanked: 3 times
Removing Sectional in 3807
Hi I have a 1989 3807 Aft Cabin and I need to remove the Sectional couch any ideas- too big to fit through the doors.
Any help would be great.
Matt
Any help would be great.
Matt
- waybomb
- CYO Moderator

- Posts: 2745
- Joined: February 5th, 2013, 9:24 pm
- Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85 - Location: Saint Joseph,Mi
- Has thanked: 69 times
- Been thanked: 492 times
Re: Removing Sectional in 3807
Different boat, but when we had the 4207, I needed to change the fridge. The door was not big enough. However, by taking the door frame completely out, I was able to get the old fridge out and the new one in.
My second choice was take the cabin window out and go that way.
Have you looked on the bottom side of the sections - maybe the backs unbolt from the bottom or the back?
Maybe one of those will work for you.
My second choice was take the cabin window out and go that way.
Have you looked on the bottom side of the sections - maybe the backs unbolt from the bottom or the back?
Maybe one of those will work for you.
Thanks
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
- Matt1989Carver3807
- Scurvy Dog

- Posts: 30
- Joined: March 19th, 2019, 11:43 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: San Diego
- Has thanked: 13 times
- Been thanked: 3 times
Re: Removing Sectional in 3807
Thanks Fred,
It looks like I would have to take the fabric off in order to see if it unbolts in anyway, I cant see anything externally. I'm guessing that if i have to go that route I may just pay the exrta $ to have it re-upholstered on board. I let you know how that goes!.
Matt
It looks like I would have to take the fabric off in order to see if it unbolts in anyway, I cant see anything externally. I'm guessing that if i have to go that route I may just pay the exrta $ to have it re-upholstered on board. I let you know how that goes!.
Matt
- waybomb
- CYO Moderator

- Posts: 2745
- Joined: February 5th, 2013, 9:24 pm
- Vessel Info: 1995 Boston Whaler Rage15
1987 3697 Carver Mariner
1988 Cougar 46 Kevlar Vee offshore
1969 15' Glasspar / 1967 Johnson Electromatic 85 - Location: Saint Joseph,Mi
- Has thanked: 69 times
- Been thanked: 492 times
Re: Removing Sectional in 3807
Carver got it in there somehow. Maybe give them a call and provide your HIN.
Thanks
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
Fred
1969 Glaspar Avalon /1967 Johnson Electromatic 85
1987 Carver Mariner
1988 Cougar Kevlar 46' with triple blown 572 ci
1995 Boston Whaler Rage
Past - 1988 2807, 1989 4207 Aft
- Matt1989Carver3807
- Scurvy Dog

- Posts: 30
- Joined: March 19th, 2019, 11:43 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: San Diego
- Has thanked: 13 times
- Been thanked: 3 times
Re: Removing Sectional in 3807
Hey Fred,
I actually just did that about an hr ago - service dept told me they need to be dismantled to make it out.
I appreciate the tip none the less!!
Matt
I actually just did that about an hr ago - service dept told me they need to be dismantled to make it out.
I appreciate the tip none the less!!
Matt
- Sadey
- First Mate

- Posts: 174
- Joined: September 16th, 2018, 6:56 am
- Vessel Info: Former owner of a 2003 Carver 356 with 8.1 Mercs
Agradecida
Current owner 1989 60’ Hatteras MY with 8v92 Detroit’s
Benedetto - Location: Racine Wisconsin/Ft. Lauderdale
- Has thanked: 4 times
- Been thanked: 29 times
Re: Removing Sectional in 3807
Along the same lines. How do I get the swivel chair out of my 356? The tape measure, entrance and chair disagree. Do I dismantle it.
Thank you for the help!
Dave & Trina
Dave & Trina
- tomschauer
- Admiral

- Posts: 2323
- Joined: March 28th, 2016, 10:52 pm
- Vessel Info: 1998 Carver 355
Suspicious Fishes !
2022 Kawasaki 310X - Location: upper chesapeake bay
- Has thanked: 326 times
- Been thanked: 602 times
Re: Removing Sectional in 3807
For most of the furniture, if you flip it over, cut out the bottom cloth. Cut near the outside edges, giving you enough room to staple it back in. You can then dissemble the furniture to make it through the doors, have it recovered, move back in and reassemble.
This works in most cases.
This works in most cases.
- quickdecision
- Deck Hand

- Posts: 55
- Joined: December 14th, 2016, 9:57 pm
- Vessel Info: Carver 3807, 1987
- Location: Western Lake Erie/Ft. Myers
- Been thanked: 23 times
Re: Removing Sectional in 3807
Also have 3807. I just did a complete interior remodel bulkheads, flooring and couch. The quality of the original sectional is not worth recovering. Check out homereserve.com. Or buy a couch that has a back that comes off. This will allow you to go thru the door.
Ron
Ron
- Matt1989Carver3807
- Scurvy Dog

- Posts: 30
- Joined: March 19th, 2019, 11:43 pm
- Vessel Info: 1989 Carver 3807 Aft Cabin
- Location: San Diego
- Has thanked: 13 times
- Been thanked: 3 times
Re: Removing Sectional in 3807
Hey I really appreciate the input, I will check out the Homereserve website, and I think your right the original is heavy and a little beat. I would certainly like to see what they have.
Thanks again.
Thanks again.
